FS-Garret BB turbo, Mani, 3" downpipe
Thread Starter
Member
Joined: Oct 2001
Posts: 1,599
Likes: 0
From: Santa Barbara, California, usa
FS-Garret BB turbo, Mani, 3" downpipe
ok i got a barely used turbo mani and downpipe combo. want to sell complete, but will sell peices.
used for about 2 weeks and 1 dyno session... run on synthetic only....
turbo - Retail is $1250, with tax and shipping i paid nearly $1400 - looking to get $900
The "GT3076R-WG" packs the 500HP capable, quick spooling 52 trim 76mm compressor found in the popular GT3037 with the high flowing 90 trim turbine wheel found in the bigger GT3071R-WG, making it the highest flowing turbo available in the internal wastegated configuration. Ideal higher power upgrade for GT28RS/GT2871R/GT3071R-WG setups looking for a lot more power. Comes with T25 style inlet flange.
Turbine
-Wheel: 56.5mm w/ 90 trim
-Housing: .86a/r
-Internally Wastegated (7psi included w/bracket)
Compressor
-Wheel: 76mm w/ 52 trim
-Housing: T04E style 4" inlet 2" outlet
HKS B-series cast manifold, ported. $175
ATP gt25/28 series v-band adapter for 3 inch vband downpipes - $75
downpipe 3" from turbo to exhaust 2 1/4(cause of customers piping, but can be made full 3" with about 2" of 3 inch piping) was on a Gsr engine - $200 w/vband clamp and flex section
should be used with this adapter. its made for driver side filter.... so passenger side downpipe.
all items are without shipping... and OBO.... email/pm if interested.
will take $1200 for everything + shipping
Modified by pornstarSR at 10:24 PM 10/11/2005
used for about 2 weeks and 1 dyno session... run on synthetic only....
turbo - Retail is $1250, with tax and shipping i paid nearly $1400 - looking to get $900
The "GT3076R-WG" packs the 500HP capable, quick spooling 52 trim 76mm compressor found in the popular GT3037 with the high flowing 90 trim turbine wheel found in the bigger GT3071R-WG, making it the highest flowing turbo available in the internal wastegated configuration. Ideal higher power upgrade for GT28RS/GT2871R/GT3071R-WG setups looking for a lot more power. Comes with T25 style inlet flange.
Turbine
-Wheel: 56.5mm w/ 90 trim
-Housing: .86a/r
-Internally Wastegated (7psi included w/bracket)
Compressor
-Wheel: 76mm w/ 52 trim
-Housing: T04E style 4" inlet 2" outlet
HKS B-series cast manifold, ported. $175
ATP gt25/28 series v-band adapter for 3 inch vband downpipes - $75
downpipe 3" from turbo to exhaust 2 1/4(cause of customers piping, but can be made full 3" with about 2" of 3 inch piping) was on a Gsr engine - $200 w/vband clamp and flex section
should be used with this adapter. its made for driver side filter.... so passenger side downpipe.
all items are without shipping... and OBO.... email/pm if interested.
will take $1200 for everything + shipping
Modified by pornstarSR at 10:24 PM 10/11/2005
Trending Topics
Thread Starter
Member
Joined: Oct 2001
Posts: 1,599
Likes: 0
From: Santa Barbara, California, usa
Re: FS-Garret BB turbo, Mani, 3" downpipe (BoostR41)
from atp's website...
The "GT3076R-WG" packs the 500HP capable, quick spooling 52 trim 76mm compressor found in the popular GT3037 with the high flowing 90 trim turbine wheel found in the bigger GT3071R-WG, making it the highest flowing turbo available in the internal wastegated configuration. Ideal higher power upgrade for GT28RS/GT2871R/GT3071R-WG setups looking for a lot more power. Comes with T25 style inlet flange.
The "GT3076R-WG" packs the 500HP capable, quick spooling 52 trim 76mm compressor found in the popular GT3037 with the high flowing 90 trim turbine wheel found in the bigger GT3071R-WG, making it the highest flowing turbo available in the internal wastegated configuration. Ideal higher power upgrade for GT28RS/GT2871R/GT3071R-WG setups looking for a lot more power. Comes with T25 style inlet flange.
Thread Starter
Member
Joined: Oct 2001
Posts: 1,599
Likes: 0
From: Santa Barbara, California, usa
Re: FS-Garret BB turbo, Mani, 3" downpipe (SleeperEH2_ZzZ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SleeperEH2_ZzZ »</TD></TR><TR><TD CLASS="quote">bump</TD></TR></TABLE>
Thread Starter
Member
Joined: Oct 2001
Posts: 1,599
Likes: 0
From: Santa Barbara, California, usa
Re: FS-Garret BB turbo, Mani, 3" downpipe (SuperSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SuperSi »</TD></TR><TR><TD CLASS="quote">Do you want to trade for the stuff in my sig please let me know. Refering to the HKS MANI</TD></TR></TABLE>
no trades sorry... dont need that
no trades sorry... dont need that