Virtually All Parts are brand new... Buying a house need the money for a down payment... Parts are marked used if they are not brand new... I was building a 95 Acura Integra GSR... ANY QUESTIONS PLEASE PM or Email GSR95FullRace@aol.com... Pics Available upon request... Thanx and Good luck on building your dream...

B18C1 Head:
Skunk 2 Titanium Valves
Skunk 2 Titanium Dual Valve Springs
Skunk 2 Titanium Retainers
3 Angle Valve Job
New valve seals
0 miles since Machine work...
$1700.00 OBO PENDING

4 AN vacuum lines that are made out of stainless braided lines to prevent any vacuum leaks or vacuum lines from popping off.
It includes:
1 Line from BOV to Intake Manifold
1 Line from Turbo to Intake Manifold
1 Line from Turbo to Boost Controller to Intake Manifold
Includes all fittings to install Lines
$100.00 OBO

Injector Resistor Box
$50.00 OBO

AEM Fuel Rail (Blue)(used)
$90.00 OBO

Aeromotive Fuel Pressure Regulator
$125.00 OBO

OBD1 Dizzy(used)
125.00 OBO

ABS Eliminator Kit
Includes:
Brake lines for front and rear (3 AN Stainless Steel Braided)
All fittings to adapt to calipers and master cylinder.
$100.00 SOLD
Sold Brake Kit #2
Although I have sold this kit I can get them made for about $225 so if anyone wants these let me know I will get the stuff ordered up and shipped to you...

GSR OBD1 Distributor(Used)
$125.00 OBO

GSR Valve Cover OEM(Used)
BEST OFFER..........

Type R Front Strut Bar(Used)
BEST OFFER..........PENDING


PRICES REDUCED....

Items that have already been sold:


95 Acura Integra GSR Black with Carbon Fiber Hood.
Body in excellent condition.
will be sold without all of the above. will be just rolling chassis and full interior.
Interior is in perfect condition as well.
CLEAN and CLEAR title. Perfect to start your own Project.
BEST OFFER.......... SOLD

B18C1 short block:
Golden Eagle sleeves
JE 9.0-1 Compression 82mm Pistons
Eagle H-beam rods
Clevite Bearings
GSR crank
New OEM oil pump
New OEM water pump
0 Miles on motor. Motor is Assembled...
$2750.00 OBO SOLD

GSR 5 spd Tranny
Quiafe LSD
80,000 miles
ACT Clutch
JUN flywheel
$1700.00 OBO SOLD

FULL RACE TURBO KIT
Full-Race T3 ProStreet Manifold
Full-Race 3" 4-bolt Downpipe
Full-Race Side-Door Intercooler
Full-Race T3/T67 Turbo
Tial 44mm Wastegate
Tial 50mm Blow Off Valve
Full-Race Intercooler Piping
Full-Race Oil Line Kit
Full-Race Vacuum Line Kit
Full-Race Hardware Kit
Full-Race Gasket Kit
Full-Race Silicon Coupler Kit
Never been used... THIS KIT IS STILL BRAND NEW...
$3000.00 OBO SOLD

AEM EMS 30-1000(used)
Includes:
EMS
Cable to laptop
Software CD
$1000.00 OBO SOLD

Racing Hart M5 Wheels 17's(used) 3 Pc.
$1000.00 OBO SOLD

H&R Coil Overs(used)
$500.00 OBO SOLD

3 inch Mandrel bent exhaust with cat and dual Apexi mufflers(used)
$400.00 SOLD

JG Victor X Intake Manifold(used)
$300.00 OBO SOLD

780cc RC Injectors
$250.00 OBO SOLD

Integra Starter(used)
Best Offer SOLD

GSR Motor mounts(Used) with Inserts(brand new)
Rear Motor mount
and both of the sides upper and lower motor mounts
BEST OFFER..........SOLD

6 AN Braided Stainless Steel Fuel Line
Includes:
All fittings from the tank to the Rail
Earls Performance Inline Fuel Filter
Fuel line attaches at the hanger on the tank and runs all the way to Fuel Rail
$100.00 OBO SOLD

GSR Cams (Used)
$100.00 OBO SOLD

Skunk2 Adjustable Cam Gears
$80 OBO SOLD

ARP headstuds Brand new
$80.00 OBO SOLD

Timing Belt BRAND NEW
$50 OBO SOLD



Modified by GSR95FULLRACE at 3:04 PM 9/30/2005

 

ALL pm's Returned...

 

are the GE sleeves the new HD one's?

 

who built the motor.. would you part the kit out?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboChrgd_Civic &raquo;</TD></TR><TR><TD CLASS="quote">are the GE sleeves the new HD one's?</TD></TR></TABLE>

Yes they were sleeved 6 months ago

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G"UNIT &raquo;</TD></TR><TR><TD CLASS="quote">who built the motor.. would you part the kit out?</TD></TR></TABLE>

I built the motor with the help of my buddy who owns a Import Performance shop... It is completely balanced and all clearances on bearings have been checked by a machine shop... It is built very well....

 

pm's replied thanx for all of your interests

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G"UNIT &raquo;</TD></TR><TR><TD CLASS="quote">would you part the kit out?</TD></TR></TABLE>

Currently I am not very interested in parting out the turbo kit... if you want you can post a reply on what part you want and if I can sell all the parts then I would be willing... but otherwise it is being sold as a kit... SORRY GUYS

 

ALL PM's Returned

 

PM's Returned

 

bump it up

 

Motor is pending sold....

 

How much you want for the manifold wastegate and downpipe?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G"UNIT &raquo;</TD></TR><TR><TD CLASS="quote">How much you want for the manifold wastegate and downpipe?</TD></TR></TABLE>

PM me an offer and if I can sell the front mont, BOV, piping and turbo. then i will sell it seperate...

 

[QUOTE=GSR95FULLRACE]FULL RACE TURBO KIT
Full-Race T3 ProStreet Manifold
Full-Race 3" 4-bolt Downpipe
Full-Race Side-Door Intercooler
Full-Race T3/T67 Turbo
Tial 44mm Wastegate
Tial 50mm Blow Off Valve
Full-Race Intercooler Piping
Full-Race Oil Line Kit
Full-Race Vacuum Line Kit
Full-Race Hardware Kit
Full-Race Gasket Kit
Full-Race Silicon Coupler Kit
Never been used... THIS KIT IS STILL BRAND NEW...
$3500.00 OBO

Let me clarify I have had a lot of questions on this. THIS KIT IS BRAND NEW 0000 MILES

 

interested in your kit. email me, i can't get instant mess. quick_ns@hotmail.com

full race

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slow29 &raquo;</TD></TR><TR><TD CLASS="quote">interested in your kit. email me, i can't get instant mess. quick_ns@hotmail.com

full race </TD></TR></TABLE>

EMAILED

 

is the injectors new?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ravinR68 &raquo;</TD></TR><TR><TD CLASS="quote">is the injectors new?</TD></TR></TABLE>

The injectors are new 0000 miles on them... some cuts in the upper O-ring from putting it in the AEM fuel rail I have pics send me a PM with your email address and I will send it out... the O-rings will still seal and will not leak so no worries there

 

bump sent u money for aem ems... sold to me

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18 CYA &raquo;</TD></TR><TR><TD CLASS="quote">bump sent u money for aem ems... sold to me </TD></TR></TABLE>

AEM IS SOLD thanx for the bump

 

all PM's and emails have been answered

 

PM's and emails replied

 

injectors, fuel line, fuel pump are all pending...

 

all PM's replied