b16 Aebs Intake manifold ported 70mm, Hondata gasket, STR 70mm TB
Thread Starter
Joined: May 2004
Posts: 398
Likes: 0
From: Bay Area, CA, USA
b16 Aebs Intake manifold ported 70mm, Hondata gasket, STR 70mm TB
Used for about 4k miles is the port matched (throttle body side only) 70mm intake manifold, and then i have a hondata gasket with 4k miles on it, and a Str 70mm Throttle Body with NEW GASKET and parts only used for about 2k miles.
No pictures but the throttle body looks PERFECT and the manifold is still CLEAN! (SATIN Not polished)
400$ obo
Modified by Maverik4k at 11:38 AM 7/15/2005
Modified by Maverik4k at 11:41 AM 7/15/2005
Modified by Maverik4k at 9:05 AM 7/24/2005
Modified by Maverik4k at 6:57 PM 7/27/2005
No pictures but the throttle body looks PERFECT and the manifold is still CLEAN! (SATIN Not polished)
400$ obo
Modified by Maverik4k at 11:38 AM 7/15/2005
Modified by Maverik4k at 11:41 AM 7/15/2005
Modified by Maverik4k at 9:05 AM 7/24/2005
Modified by Maverik4k at 6:57 PM 7/27/2005
Trending Topics
Thread Starter
Joined: May 2004
Posts: 398
Likes: 0
From: Bay Area, CA, USA
Re: b16 Aebs Intake manifold ported 70mm, Hondata gasket, STR 70mm TB (Maverik4k)
Im going to need the sensors but i will throw in the iacv off the manifold, also this comes with a brand new 70mm gaskter which origianlly came with the tb. (i had the one one there now made)
400$ obo
400$ obo
Thread Starter
Joined: May 2004
Posts: 398
Likes: 0
From: Bay Area, CA, USA
Re: b16 Aebs Intake manifold ported 70mm, Hondata gasket, STR 70mm TB (Maverik4k)
PICTURES!
also i had the studs epoxied into the manifold becuase those of you who have used this manifold know they dont hold in very well so thats aother 70$ job done to this maifold.
also i had the studs epoxied into the manifold becuase those of you who have used this manifold know they dont hold in very well so thats aother 70$ job done to this maifold.
