I was just wondering what cams you guys would reccomend with this set up?
Motor is in an EF civic hatch

B18C block
darton 84mm sleeves
JE 12.5:1 pistons
crower rods
stock crank
ported gsr head
valvetrain??
hondata s200
390cc injectors
twm 52mm ITB's
DC 4-1

I was thinking skunk2 stage3's with skunk2 valvetrain,
My engine builder is trying to talk me into crane stage3's with ferrea 1mm oversize valves.

The car is still my daily driver and will be used for drag racing

I have searched but cant fing anything that helps me

Any help would be much appreciated


Modified by civic5513 at 10:53 AM 7/14/2005


Modified by civic5513 at 7:27 PM 7/14/2005

 

Buy my Skunk2 Stage2's, your not built enough for the stage3 with only 12.5:1 CR!! Also the 390cc injectors will have to be replaced with larger 440cc injectors. If your interested PM me and I will give you a good deal!!

 

when i was searching i found a couple of guys running only 12.0:1 - 12.2:1 compression with skunk2 stage3's.
I would just like to know what cams would be best suited to my setup and purpose?

 

Stage 3's, or the new PRO2's would be fine. 52mm TWM's are a little large for the street though.

 

Rocket Motorsports

 

bump