i have a 96 gsr motor built for turbo. everything is new and changed.
golden eagle sleeves. 81mm
je 9:0:1 pistons
eagle h beam rods.

competition Alaniz headwork. (1400 dollar head work)
3 angle valve job changed retainers ,springs, and got oversized valves.
port and polished.
Complete visual inspection of complete head. Check all surfaces for straightness. Complete disassembly. Inspect all valvetrain parts for wear. Remove all studs and lap all surfaces. Degrease and clean head of oils. Baseline flow bench test. Full Competition port and polish head.Polish, deshroud and debur all chambers. Competition valve job. Resurface and hand lap head to customer specs, or up to .030 material removal. Final flow test with data sheet. Reassemble complete head. Final CC check. Includes valve seals.

type r oil pump and brand new water pump. i have a oem honda 3 layer headgasket.

everything on the motor is brand new. never been started after rebuild.
might be some other stuff i cant think of at the moment. complete motor with tranny


jg intake manifold victor x brand new-280
competition stage 5 turbo sprung clutch with flywheel.-450

i can get pics.

4500 obo.
aim is - spoozenguyen
email is- spoozenguyen@hotmail.com
phone number 361-688-6040

 

anyone

 

full swap.