i have everything ready to go with my new rotas but i dont have lug nuts just wondering what everyone else is using so i dont buy the wrong ones.... i dont really get whats the difference between closed end etc... and for sure i know you cant use your stock ones..... just want to no what everyone else is using........thanks

 

opened end are used for extended wheel studs/ closed are for regular studs...

 

im using the stock lugnuts just took off the little plastic ring on my c8s

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kleanlscivic &raquo;</TD></TR><TR><TD CLASS="quote">im using the stock lugnuts just took off the little plastic ring on my c8s</TD></TR></TABLE>

i hope you have locks on your wheels..... stock ones are cool to use but i figure new rims calls for new lug nuts

 

I've been using Muteki lug nuts from Evasive motorsports for over a year. Make sure you put a dab of antiseize if they are the open ended nuts so they don't seize up on you.

Make sure to get the tapered lug nuts, not the OEM cone style!

 

STOCK LUGS + AFTERMARKET WHEELS = NONO

I have some rotas and have spline drive lugs on there. No problems. Any after market cone seat lugs will work. Just preference. I do recomend getting locks cause people are haters in this world. But what ever you do, dont use your stock lugs to put them on.

 

tapered lug nuts for wheels with tapered seats like \ / and acorn lug nuts for wheels with rounded seats like U

 

I've been using my Skunk2 lugs on my Subzeros for over a year, not one problem.

 

Im using Rays Engineering on mine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Street Ghost &raquo;</TD></TR><TR><TD CLASS="quote">Im using Rays Engineering on mine.</TD></TR></TABLE>

Same here.

 

Depending on which rotas he has maybe i know the stock lugs work fine and seat fine with the slipstreams.

 

gorillas - I dont care what anyone says about them; Ive had 3 sets and 0 issues. Good lugs for the cost

 

rotas=sex

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecpoweredsol &raquo;</TD></TR><TR><TD CLASS="quote">rotas=sex</TD></TR></TABLE>

your post = worthless

 

Muteki open ended lug nuts for over a year on my Rota Subzeros

Get them here: http://www.jlbmotorsports.com/

 

Volk Racing

Cheap wheels need cheap lug nuts like Gorilla.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jowee 1162 &raquo;</TD></TR><TR><TD CLASS="quote">Volk Racing

Cheap wheels need cheap lug nuts like Gorilla. </TD></TR></TABLE>

I spent all of my money on my engine, transmission and suspension. I can't afford $9823759082359823958r3498ruw38rfhsehrbgk98e45tlu3w 54ghti734y5tki37u4y587236458y245kt7hw3487th3w45yti 283465
for wheels.

 

LOL, I had Gorillas on my Slips and have them for my race wheels. I'm wanting a set of Buddy Club lightweight lug nuts though. A set of Volk lug nuts costs as much as or more than 1 Rota. You'll have to worry about people jacking your lug nuts before they want your wheels.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoolingb20 &raquo;</TD></TR><TR><TD CLASS="quote">Depending on which rotas he has maybe i know the stock lugs work fine and seat fine with the slipstreams. </TD></TR></TABLE>
Sureeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

 

Stock lug nuts should not be used with Rotas, regardless of which model wheel it is. They are designed to be used with tapered or "conical" seat lug nuts. Doesn't really matter which ones you use, as long as they fit and they are of the proper design.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jowee 1162 &raquo;</TD></TR><TR><TD CLASS="quote">LOL, I had Gorillas on my Slips and have them for my race wheels. I'm wanting a set of Buddy Club lightweight lug nuts though. A set of Volk lug nuts costs as much as or more than 1 Rota. You'll have to worry about people jacking your lug nuts before they want your wheels. </TD></TR></TABLE>

Lol. Yea, das true

 

Im using mcgard spline drive for my rota slipstream.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pdiggitydogg &raquo;</TD></TR><TR><TD CLASS="quote">gorillas - I dont care what anyone says about them; Ive had 3 sets and 0 issues. Good lugs for the cost</TD></TR></TABLE>

I concur

 

I had lug nuts from wheelmax.

 

What's wrong with Gorilla's? I had a set on my TE-37's and they were fine to me. Never had a problem for 2 years. They were at the shop so I used them instead of dropping a mint on ******* JDM lugnuts. Oh well....