Lower NY...Turbo Kit..B Series! 400-500whp!
Thread Starter
Honda-Tech Member
Joined: Jun 2003
Posts: 9,555
Likes: 0
From: NYC bitchessss
Lower NY...Turbo Kit..B Series! 400-500whp!
I have a turbo kit for a b series engine for sale. I bought the kit used, with plans to turbo one of my Integra's, but have decided not to. Now I need some $$ and I'm going to try and make it by selling the kit.
Here's whats included in the kit:
**Garett t3 60-1 turbo.. .70 a/r cold side, .63 a/r on the hot side (Rebuilt 500 miles ago)
Compressor:
Full shot:
Compressor Blade shot:
Turbine blade shot:
**Fresh powder coated intercooler piping (may need a small extra piece or two)
Small Dent on charge piping:
**3" downpipe (slightly dented...but it's on the top, looks like it was dented to clear an oil pan)
**Tubular manifold
**Tial 38mm Wastegate with dumptube
**Vortech BOV
**Bar and plate top to bottom flow intercooler
--Specs (core size): 18" long--3" thick--6" high
**A few couplers and clamps
So what is needed is basically oil feed and return lines (cheap) and your choice of fuel managment!
Alright...So I'm looking for a few parts....if you have em and want to do partial trades....here they are:
--1000cc injectors (willing to spend $300 on these)
--Thermal R&D 3" exhaust for a 1997 integra (95-01 DC chassis)
ORRR...
I will trade the kit straight up for a running good condition civic, hatch, crx, whatever...basically a beater worth about $2,000.
If I sell the kit out right, I'm looking to get $2,000 Or BEST OffeR~!!!!!
I prefer local pickup, it makes my life much much easier.
Here's whats included in the kit:
**Garett t3 60-1 turbo.. .70 a/r cold side, .63 a/r on the hot side (Rebuilt 500 miles ago)
Compressor:
Full shot:
Compressor Blade shot:
Turbine blade shot:
**Fresh powder coated intercooler piping (may need a small extra piece or two)
Small Dent on charge piping:
**3" downpipe (slightly dented...but it's on the top, looks like it was dented to clear an oil pan)
**Tubular manifold
**Tial 38mm Wastegate with dumptube
**Vortech BOV
**Bar and plate top to bottom flow intercooler
--Specs (core size): 18" long--3" thick--6" high
**A few couplers and clamps
So what is needed is basically oil feed and return lines (cheap) and your choice of fuel managment!
Alright...So I'm looking for a few parts....if you have em and want to do partial trades....here they are:
--1000cc injectors (willing to spend $300 on these)
--Thermal R&D 3" exhaust for a 1997 integra (95-01 DC chassis)
ORRR...
I will trade the kit straight up for a running good condition civic, hatch, crx, whatever...basically a beater worth about $2,000.
If I sell the kit out right, I'm looking to get $2,000 Or BEST OffeR~!!!!!
I prefer local pickup, it makes my life much much easier.
