I am having major problems with the resonator on my Apex WS exhaust scraping on EVERYTHING. That thing hangs almost an inch lower than anything else on my car. I was contemplating getting rid of the pipe between the cat and the axleback section, but can't find any 60mm pipes.

I did a conversion from 60mm to in. and I got 2.36".

Would I be better off putting in 2.25" pipe and bolting it right up to the 60mm ID flanges? Or 2.5"?

Are there reducers that go from 60mm to 2.25/2.5"?

Thanks!

 

2" pipe = 2.375" OD (s/5 = .065" wall)
2.5" pipe = 2.875" OD (s/5 = .083" wall)

2-3/8" (2.375") tube with an .065" (16ga.) wall is also available.


Both items are good in stock. If you have any questions please feel free to IM me anytime.