Hey guys,

After reading too much honda-tech and getting my brain washed, ive gone ahead and done a jdm front end conversion on my MR dc2 type R from down under..

All is on, but ive been thinking of a decent place to wire the fogs to...
I have removed my rear wiper to complete the "JDM YO" look. and Since i have no rear wiper .. im thinking about wiring up my fogs to the rear wiper switch..

does anyone know where the relay/wiring for the rear wiper can be found ? that would be easily accessible ?

Ill post some pics of the car once i get a chance ..

 

Why not use the JDM foglight switch?

 

there are sections on the center console near the handbrake where it seems like you could put the switch, thats where my fog light one switch will be mounted soon, then again I have a 96 GSR, so Im not sure if the R's the same way.

 

i'd wire them up to the OEM factory foglight harness...then splice in whatever connector you want to turn it on. i used the USDM foglight switch/harness, as it was readily available

 

thats what i did as well, however, if you don't have cruise control or you do hvae it and feel that you don't need it, just use the cruise control switch..or get a jdm switch.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tofuR &raquo;</TD></TR><TR><TD CLASS="quote">Hey guys,
ive gone ahead and done a jdm front end conversion on my MR dc2 type R from down under..


Ill post some pics of the car once i get a chance ..</TD></TR></TABLE>

Pics!
MR ITR = Hotness