EF guys..... Full LS/VTEC swap, 205HP with 136TQ....
Thread Starter
Honda-Tech Member
Joined: Jun 2003
Posts: 2,513
Likes: 0
From: Huntington Beach, CA
EF guys..... Full LS/VTEC swap, 205HP with 136TQ....
complete changeover for EF, LS/VTEC built by Eugene from Pro Street Import. here's the rundown....
LS bottom end with balanced LS crank, type r bearings, type r .025 over pistons
B16 head, ported by portflow, full valvetrain done
skunk2 stg 2 cams
type r intake manifold
type r header
ys1 cable trans with no grinds
act clutch
jumper harness to OBD1
chipped P28 ECU
complete EF mount kit and linkage already set up for EF's
EVERYTHING you need to put this in your car and start whipping people on the street. i have plenty of vouches and almost this exact motor built by Eugene was featured in the last issue of honda tuning magazine, if there are any doubts of what this motor could do with a couple more bolt ons thumb through the pages of that mag. $3600... CHEAP, get back to me if you have any questions or need it installed, all of that can be arranged. thanks again for looking guys. plenty of vouches... mike.
LS bottom end with balanced LS crank, type r bearings, type r .025 over pistons
B16 head, ported by portflow, full valvetrain done
skunk2 stg 2 cams
type r intake manifold
type r header
ys1 cable trans with no grinds
act clutch
jumper harness to OBD1
chipped P28 ECU
complete EF mount kit and linkage already set up for EF's
EVERYTHING you need to put this in your car and start whipping people on the street. i have plenty of vouches and almost this exact motor built by Eugene was featured in the last issue of honda tuning magazine, if there are any doubts of what this motor could do with a couple more bolt ons thumb through the pages of that mag. $3600... CHEAP, get back to me if you have any questions or need it installed, all of that can be arranged. thanks again for looking guys. plenty of vouches... mike.
Joined: Mar 2005
Posts: 393
Likes: 0
From: socal, ca, usa
Re: EF guys..... Full LS/VTEC swap, 205HP with 136TQ.... (Zero4Racing)
What type of chip is the p28 using? Can you find out about the mounts. How many miles on the build. Also is that a gsr head? I am very interested.
Thread Starter
Honda-Tech Member
Joined: Jun 2003
Posts: 2,513
Likes: 0
From: Huntington Beach, CA
Re: EF guys..... Full LS/VTEC swap, 205HP with 136TQ.... (K SERIES)
thanks a ton guys, really appreciate it. P28 is a mugen program, has 6k miles since the rebuild, and i'll find out on the mounts for you. it's a B16 head, i think i put that in the ad but i might not have. anyway, thanks again. hey Brian, how is that motor going for you?
Trending Topics
Honda-Tech Member
Joined: Jul 2004
Posts: 1,943
Likes: 0
From: 909, ca, usa
Re: EF guys..... Full LS/VTEC swap, 205HP with 136TQ.... (Zero4Racing)
motor is holding up real good still. trying to save up some money to do the head and cams. another bump for you guys.. awesome work! 
Member
Joined: Jun 2004
Posts: 1,342
Likes: 0
From: HB, CA, USA
Re: EF guys..... Full LS/VTEC swap, 205HP with 136TQ.... (Oldskool teggy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Oldskool teggy »</TD></TR><TR><TD CLASS="quote">motor is holding up real good still. trying to save up some money to do the head and cams. another bump for you guys.. awesome work! </TD></TR></TABLE>
My Zero4Racing(mike) installed JDM GSR ran like a champ. Still runs hard for the new owner
</TD></TR></TABLE>My Zero4Racing(mike) installed JDM GSR ran like a champ. Still runs hard for the new owner
