i know you are all going to say search and i did.... i searched all the wiring write ups for a OBD 0 JDM B16 into a USDM CRX DX.... i already purchased one of those harnesses that you CRX guys make up with the VTEC wiring and the extra injectors added on... its suppose to be plug and play but the A3 and A7 pins i pull out have a yellow wire and a Black wire at the ECU where do those go because they just cant be discarded ...the car starts but runs like **** and on two cylinders and the injectors are dumping massive amounts of fuel..and i was told to plug the VTEC solenoid into the A16 spot but i think that wrong too does anyone have a clue as to where everything exactly goes or a thread that can help me out thats really good....