Custom Uberdata Drag Gen 4 Turbo Kit
This is a complete Drag Gen 4 turbo kit built to run on H22 motors. The piping is setup for the 4th Gen Preludes, but with different piping it can be ran with any H22 motor setup. This is a custom set up and can be ran a couple of different ways do to all the parts that come with this kit. Via Uberdata ECU, or Vortech 12:1 Boost Dependent FMU, and can be ran with original turbo kit air intake piping, or Straight turbo air intake piping to be used with a battery relocation kit (like in the pics). This kit is in great condition and has less than 3000 miles on setup.
Parts list:
Turbonectics T3/T4 turbo, 57 trim, Polished housing, Less than 3000 miles on turbo
Drag 4 to 1 turbo manifold for H22 motor (short to work well with AC lines)
TIAL Wastegate
Drag Dump Tube
Blitz Dual-Drive BOV
Spearco FMI
Uberdata ECU ( Programable fuel, timing, and data logging )
440 DSM Injectors
Vortech 12:1 Boost Dependent FMU fuel regulator (never used, still in original bag)
Manual Boost Controller Valve
2.5 inch downpiping already fitted with flex pipe and flanged for bolt UP
Steel Braided Oil feed with inline oil pressure gauge
Megan Oil Pressure Gauge (black outs)
Megan Turbo Boost Gauge (black outs)
Intake Air Filter Assembly (with two options)
Air Filter
All the Mandral bent piping, fittings, hoses, gaskets, and clamps to install kit


















$1300 for all of the above....If you have any questions feel free to contact me via PM or by Phone.
Thanks,
Kelly
(702) 271-6860
Parts list:
Turbonectics T3/T4 turbo, 57 trim, Polished housing, Less than 3000 miles on turbo
Drag 4 to 1 turbo manifold for H22 motor (short to work well with AC lines)
TIAL Wastegate
Drag Dump Tube
Blitz Dual-Drive BOV
Spearco FMI
Uberdata ECU ( Programable fuel, timing, and data logging )
440 DSM Injectors
Vortech 12:1 Boost Dependent FMU fuel regulator (never used, still in original bag)
Manual Boost Controller Valve
2.5 inch downpiping already fitted with flex pipe and flanged for bolt UP
Steel Braided Oil feed with inline oil pressure gauge
Megan Oil Pressure Gauge (black outs)
Megan Turbo Boost Gauge (black outs)
Intake Air Filter Assembly (with two options)
Air Filter
All the Mandral bent piping, fittings, hoses, gaskets, and clamps to install kit


















$1300 for all of the above....If you have any questions feel free to contact me via PM or by Phone.
Thanks,
Kelly
(702) 271-6860
Yeah $1300 is rock bottom for the turbo setup. I figured I'd sell the turbo setup cheap, and not play the haggle game. But if you're really interested in it. You many have a little time before it sells cause I haven't listed it on ebay yet. H-tech is the only nation wide site I've listed it on. I've mainly only listed it on a couple of local race forums. Im prolly gonna list it on ebay today. Im pretty confident I will sell on ebay since its a custom turbo setup that costed me well over $3000 with all the extras. And it's low mileage, hardly used with less than 3000 miles. Everything is like new as you can see in the pics...All in all its a great custom turbo setup. I was really happy with it, and I hate to sell it. But my first born child is gonna be born soon, and thats gonna be my first priorty for a while. I'll still be into cars, I just gotta take care of my responsiblities before I get back into the import tunning game.
In my ebay add I put right to cansel early. Just incase someone like yourself wants it. So you have about a week or so to come up with $400 more if your really interested in gettin a kickass Uberdata Turbo Setup with all quality parts for alot less than half of what it costed to buy new. But well maintain and just as good as new.
Let me know whats UP....I got a friend that can help out with shipping, so shipping it will be cheap too.
In my ebay add I put right to cansel early. Just incase someone like yourself wants it. So you have about a week or so to come up with $400 more if your really interested in gettin a kickass Uberdata Turbo Setup with all quality parts for alot less than half of what it costed to buy new. But well maintain and just as good as new.
Let me know whats UP....I got a friend that can help out with shipping, so shipping it will be cheap too.
Well thanks for the bump anyways....Its really a good Turbo setup...I hate to sell it, but racing is gonna have to be secondary to me for a little while. I got some family stuff that came up, so its priced to sell.
Thread
Thread Starter
Forum
Replies
Last Post
Hybrid96EK
Classifieds: Forced Induction
13
Mar 6, 2005 02:38 PM
Gennady
Honda Accord (1990 - 2002)
16
Mar 9, 2002 02:21 PM



haha bump

