BUSA has been purchased!!!! (6.2.05)

All 954RR parts are FOR SALE and READY to go!!!!

Here's what I got:

-CRG shorty gold levers (Brake & Clutch) - $180/pr




-Dan Kyle reworked forks (Racetech .95 springs & Ohlins gold valves) - $550
***No CORE required, keep your factory forks***






-Dan Kyle preload adjusters (Black) - $20


-Factory OEM Honda rear sear cowl - $150




Modified by Ag-Eng at 11:01 PM 6/17/2005

 

can i see your sliders?

<-- interested

 

Interested in the forks/preload adjusters.

How much do you weigh? How long ago were the forks worked? How many miles were on the forks before/after rework? Are you willing to ship em?

Let me know as I was going to send my front forks out to dk for a service cause the forks are a little too stiff for me.

Got pics?

childes77 at yahoo dot com

Thanks

Steven

 

how many miles on the damper/ exhaust? and powercomander.... not that i have the money right now, but in the near future if you still have it.... was this a track bike? any scratches on the pipe.. pics please

 

Pix are up, as you will see, I take REAL good care of my equipment. The spots you see on the bottom of the exhaust are not rust, merely water spots and road debris. There are NO dents or dings in my system at all.

Exhaust, damper - About 7000 miles

Forks - About 500 miles after rework. I don't know about before because I bought a set off ebay to send to DK so I could still ride my bike.

For the record, I weigh 215 with gear and the .95 spring is PERFECT for my style of riding.

 

All those parts look clean.... I am definately interested in the forks and adjusters. Unfortunately the springs are going to be a little too stiff for my skinny a$$. I am going to look into how much it would cost to have the springs swapped out. They are the race tech ones correct?

I know a set of replacement springs is about 100 bucks.

Thanks

Steven

 

I believe Dan put Ohlins springs in my forks. However, I could be mistaken and they are RaceTechs.

 

Is there any way you can find out for sure which springs they are? I am more than likely going to have to replace the springs as I will need a .85 spring. I am unsure on the cost of ohlins replacement forks.

Thanks

Steven

 

find anything out about those fork springs? I am really interested but if they are setup for ohlins forks I need to find out how much those replacement fork springs would be.

Thanks

Steven

 

I wouldnt mind taking the windscreen and frame sliders....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cbrman &raquo;</TD></TR><TR><TD CLASS="quote">find anything out about those fork springs? I am really interested but if they are setup for ohlins forks I need to find out how much those replacement fork springs would be.

Thanks

Steven</TD></TR></TABLE>

They are RaceTech springs .95.

Replacement springs are $109/pr from DK.

 

Would you do 550 shipped with the preload adjusters? If so, let me know how you want payment. I can do paypal immediately if you like.

Steven

 

pics of the pipe on the bike????

 

https://honda-tech.com/zerothread?id=1257996

 

Will you make me a deal on the exhaust and GPR unit? I am in Rancho Cordova, Ca 95742 and would need it shipped. Can you let me know how much? Thanks, Andy

 

did you get my pm or email?

Very interested and i have cash in hand.

Thanks

Steven

 

I didnt get the pm. Can you call me at 916-316-2111 or during the day at 800-827-3673 x 106. Thanks, Andy

 

PM's replied to...

Bump for a saturday afternoon!

 

bump!

 

bump - must sell!

 

Exhaust and GPR pending sale!

 

If the levers will fit a 1000rr, consider them sold. Let me know if they will work!!!


Boosted2000si@aol.com for your fastest response.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondab1015 &raquo;</TD></TR><TR><TD CLASS="quote">If the levers will fit a 1000rr, consider them sold. Let me know if they will work!!!


Boosted2000si@aol.com for your fastest response.</TD></TR></TABLE>

Talked to CRG, they are different.

Sorry!


Modified by Ag-Eng at 11:02 PM 6/17/2005

 

bump!!!