How I spent my Sunday afternoon.....motor pull.
Thread Starter
Honda-Tech Member
Joined: Jun 2003
Posts: 754
Likes: 0
From: MaCclenny, Fl, USA
How I spent my Sunday afternoon.....motor pull.
I just wanna say for everybody that is a little uneasy about pulling there motor not to be intimidated the biggest challenges were the axle nut, the ball joints, the "bitch pin", and the lower motor mount by the a/c compressor. We used a come along attached to the rafters of our garage. After about 5 hours we had it pulled. (We were pretty proud as this was our first swap) Now that the motor is out I'll start parting it out to buy my new motor. Possibly a jdm B16. btw. my motor spun a bearing and needs piston rings. If you guys have any questions about pulling the motor please post up and We'll answer them. Until then enjoy these pics of us enjoying our virgin motor pull.....
Civic-si-2000
Insomniac791
Modified by civic-si-2000 at 9:08 PM 5/29/2005
Civic-si-2000
Insomniac791
Modified by civic-si-2000 at 9:08 PM 5/29/2005
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jun 2003
Posts: 754
Likes: 0
From: MaCclenny, Fl, USA
I know theres not really a lot of tech but we were happy about pulling our first motor and we wanted to give others that have not pulled one a look on the bright side and show them thats its not so bad.
We had a good time
2 buddies
12 case mountain dew
and a Digi Cam
We had a good time
2 buddies
12 case mountain dew
and a Digi Cam
Honda-Tech Member
iTrader: (1)
Joined: Aug 2001
Posts: 4,180
Likes: 1
From: Funfax, VA, United States
Re: How I spent my Sunday afternoon.....motor pull. (cupuhnoodles)
motor pulls are simple after a couple of times, mainly its having the correct tools and being organized..
HF Impact gun for Axle nut, and other stupid bolts
Stock Airbox bolt for getting "bitch" pin out
BFH
prybar
HF Impact gun for Axle nut, and other stupid bolts
Stock Airbox bolt for getting "bitch" pin out
BFH
prybar
Honda-Tech Member
Joined: Nov 2003
Posts: 8,963
Likes: 0
Re: (kaoss_11)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kaoss_11 »</TD></TR><TR><TD CLASS="quote">Humping a motor. Thats real jdm</TD></TR></TABLE>
Don't be mad...just because you drive and EF
Don't be mad...just because you drive and EF
Honda-Tech Member
Joined: Feb 2002
Posts: 1,889
Likes: 2
From: Florida, USA
Re: How I spent my Sunday afternoon.....motor pull. (seeeya04)
Good Times Craig....Good Times
yep that is me riding the motor and doing the crane! We had fun and it was a great learning experience. I can't wait to get to work on the new motor!!
We worked on it off and on. We stopped for a few photo shoots as you can see and lunch and just to BS but definately more work than play Im beat and I am sure I will sleep good tonight! Im fear putting the new one in will be twice as hard especially with all the wiring!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by seeeya04 »</TD></TR><TR><TD CLASS="quote">Hey how much for the tranny...</TD></TR></TABLE>
He won't be on anymore tonight but im sure he will answer you tommorrow. I can vouch for it being a good tranny thouhg with NO grinds!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93ejay1 »</TD></TR><TR><TD CLASS="quote">i just noticed u got a UTI shirt on, did u go there?</TD></TR></TABLE>
Yea he went to UTI in texas.
Thanks guys
Later
Matt
Joined: Feb 2004
Posts: 392
Likes: 1
Re: How I spent my Sunday afternoon.....motor pull. (cupuhnoodles)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cupuhnoodles »</TD></TR><TR><TD CLASS="quote">looks like more play than work</TD></TR></TABLE>
It's like they said in The Shining: 'All work and no play make Jack go crazy'.
You gotta balance it out. Good work on the engine removal dude.
It's like they said in The Shining: 'All work and no play make Jack go crazy'.
You gotta balance it out. Good work on the engine removal dude.
