***FS: EX Cluster, Potenzas, GSR Head B18C1, etc***
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 1,053
Likes: 0
From: Omaha, Nebraska, United States
***FS: EX Cluster, Potenzas, GSR Head B18C1, etc***
Located in Omaha, NE. I would prefer pickup on the tires and the head, but will ship at buyers expense if NECESSARY.
1997 Civic EX Cluster
*Shows 124k
*Glass is clear, minimal scratches (if any)
<U>*Looking for $75.00 obo (+shipping)</U>
Bridgestone Potenza S-03 Pole Position
*205/50/16
*About 4k miles on them
*90% tread depth or more (were on a stock single cam, not raced)
*One has a few rub marks on the outside of the sidewall
*New, they price at $156.00/each not including shipping, which equals $624.00 (w/o shipping).
*http://www.tirerack.com/tires/...ition
<U>*Looking for $400.00 obo (+shipping, prefer pickup)</U>
B18C1 GSR Cylinder Head
*PnP done by Chad @ 3dmotorsports (Local)
*Red AEM Spark Plug Cover
*Two Valve Covers (Both Stripped, One has cam cover cut)
*STR Cam Gears (silver/polished)
*Three Angle Valve Job
*Holley Fuel Rail
*Autometer Fuel Pressure Gauge on Rail
*Stock GSR Cams
*Stock Valvetrain
*Includes Distributer
*Includes stock GSR Intake Mani
*Includes Cam Caps
*Dissassembled
*Needs planed (Cylinder #1 Detonated)
<U>*Looking for $800.00 obo (+shipping, prefer pickup)</U>
Modified by carlton585 at 1:38 PM 5/28/2005
Modified by carlton585 at 1:40 PM 5/28/2005
1997 Civic EX Cluster
*Shows 124k
*Glass is clear, minimal scratches (if any)
<U>*Looking for $75.00 obo (+shipping)</U>
Bridgestone Potenza S-03 Pole Position
*205/50/16
*About 4k miles on them
*90% tread depth or more (were on a stock single cam, not raced)
*One has a few rub marks on the outside of the sidewall
*New, they price at $156.00/each not including shipping, which equals $624.00 (w/o shipping).
*http://www.tirerack.com/tires/...ition
<U>*Looking for $400.00 obo (+shipping, prefer pickup)</U>
B18C1 GSR Cylinder Head
*PnP done by Chad @ 3dmotorsports (Local)
*Red AEM Spark Plug Cover
*Two Valve Covers (Both Stripped, One has cam cover cut)
*STR Cam Gears (silver/polished)
*Three Angle Valve Job
*Holley Fuel Rail
*Autometer Fuel Pressure Gauge on Rail
*Stock GSR Cams
*Stock Valvetrain
*Includes Distributer
*Includes stock GSR Intake Mani
*Includes Cam Caps
*Dissassembled
*Needs planed (Cylinder #1 Detonated)
<U>*Looking for $800.00 obo (+shipping, prefer pickup)</U>
Modified by carlton585 at 1:38 PM 5/28/2005
Modified by carlton585 at 1:40 PM 5/28/2005
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 1,053
Likes: 0
From: Omaha, Nebraska, United States
Re: ***FS: EX Cluster, Potenzas, GSR Head B18C1, etc*** (carlton585)
Will have pictures up momentarily.
EDIT: Pictures Are Up!
Modified by carlton585 at 1:38 PM 5/28/2005
EDIT: Pictures Are Up!
Modified by carlton585 at 1:38 PM 5/28/2005
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 1,053
Likes: 0
From: Omaha, Nebraska, United States
Re: ***FS: EX Cluster, Potenzas, GSR Head B18C1, etc*** (carlton585)
w3rd. tires held air for the 2 months that i had them. constant. sidewalls are VERY stiff. they had more problems putting these over my rims than my 40 series azenis rt615s.
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 1,053
Likes: 0
From: Omaha, Nebraska, United States
Re: ***FS: EX Cluster, Potenzas, GSR Head B18C1, etc*** (vman)
i believe it is an OBD1 head, but the distributer was wired for an OBD2 harness. mileage on the head is roughly 10k as i was told from the previous owner.
Thread
Thread Starter
Forum
Replies
Last Post