Selling a set of stage I OBX cams. Specs :Type: Stage I
Part Number: 10461 Lift/Duration: IN. 0.475, 255; EX. 0.436, 255.
These have the same specs as H22 Skunk cams. The cams were used for 1 month and less than 600 miles. I was using these cams without an upgraded valvetrain since I was not reving past redline. There was no sign of abnormal rocker arm or cam lobe wear. I ran a best of 14.8 at an elevation of 4200 ft above sea level with these cams along with I/H/E/cat/Pullies/ VAFC. My best time before the cams was a 15.3 at 4200 ft above sea level . I am selling these cams becase I am going to go with stage II along with upgraded valvetrain. $290 shipped firm.

Also selling:
Prelude 92-95, 2.25 carsound cat with flanges, used for over one year, went with a 2.5 cat $75 *SOLD*
-RC Engineering billet "Monster" TB 66m opening, TPS has to be recalibrated and the idle adjustment screw is missing. $100
-H23 complete head w/4 bent valves, includes intake runners, manifold and TB. TB does not have tps or throttle rotor. make best offer.
-2 VSS sensors one off a h23 and another off a H22. best offer
- H22/H23 EGR valve best offer *SOLD*
-H23 Front calipers best offer
-H22 passenger side mount $30
-H22 rear mount $30
-H22/H23 Neuspeed Short Shifter adapter- best offer-
-Walpro 255lp fuel pump used for 2 years - best offer *SOLD*
-Adj. Fuel Pressure Regualtor, the gauge is a little cloudy but still works great- best offer
H22 Non ABS drive shafts best offer
intermediate shaft. -Best offer *sold*

Modified by Chivas at 12:38 AM 6/1/2005


Modified by Chivas at 12:32 PM 6/7/2005


Modified by Chivas at 8:53 AM 6/9/2005


Modified by Chivas at 10:57 AM 6/11/2005

 

bump

 

Cat sold

 

intermediate shaft sold

 

bump

 

bump