FS: SoCal 1990 Integra rolling chassis with LOTS of extras very clean $2100
Thread Starter
Honda-Tech Member
Joined: May 2003
Posts: 1,326
Likes: 0
From: Irvine, CA, USA
FS: SoCal 1990 Integra rolling chassis with LOTS of extras very clean $2100
<U>NEW UPDATED PRICE!!
$1300 for chassis/suspension/brakes/interior/front & rear lights/thermal stainless exhaust system/probably some steelies/and posssibly the LS tranny
I'm taking the engine/harness/ECU/radiator/radio/quick release steering wheel/jdm cluster
I will be replacing the JDM cluster with a US cluster and the steering wheel will be replaced as well.</U>
1990 Acura Integra rolling chassis. Mileage on car is unknown. Car has salvage title due to theft. Car has sunroof, power windows and driver side power door lock (passenger lock has a dead lock but I have several keys for that). No radio. No power steering (however it was opted for a non-powersteering Si rack). No A/C components at all (saved alot of weight). Car has been painted couple years ago but has been covered or garaged most of the time. Custom corvette yellow paint color. door jams and trunk jams and engine bay was painted. Moldings were also painted body color. Hood has hairline crack but not too noticeable (easily fixed with CF hood). 90 taillights (clear/red). Car came out in SEVERAL magazine issues. Motor was pulled to be put into another project car. Car has many little extras. Not sure what wheels i'll be selling the car with. I don't have any steelies yet to put on.
Here are some extras:
1) JDM gauge cluster (in km/h and higher redline)
2) JDM one piece headlights
3) PIAA Ion yellow foglight bulbs
4) Fluidyne full-size aluminum radiator
5) Thermal cat-back full stainless exhaust system
6) Interior is complete with 93 GS-R seats front and rear. Interior color is black/grey
7) Tokico blues shocks and neuspeed springs
8) ES poly bushings
9) 92-93 Front bumper with lip with clear bumper signal lenses
$2100 for rolling chassis. This is perfect for a project car. Just choose what motor you want to put in there and you are set.
I also have a couple other extras but won't be included in the rolling chassis unless you want to buy. I have a Full-Race traction bar and momo hub/NRG quick release with a steering wheel. $400 extra for both.
I will post pictures up ASAP but I need to get hold of a digital camera. I lost mine in Las Vegas last month and looking for a replacement.
Modified by Jspec_Imports at 8:13 PM 5/18/2005
Modified by Jspec_Imports at 10:45 PM 5/26/2005
Modified by Jspec_Imports at 10:46 PM 5/26/2005
$1300 for chassis/suspension/brakes/interior/front & rear lights/thermal stainless exhaust system/probably some steelies/and posssibly the LS tranny
I'm taking the engine/harness/ECU/radiator/radio/quick release steering wheel/jdm cluster
I will be replacing the JDM cluster with a US cluster and the steering wheel will be replaced as well.</U>
1990 Acura Integra rolling chassis. Mileage on car is unknown. Car has salvage title due to theft. Car has sunroof, power windows and driver side power door lock (passenger lock has a dead lock but I have several keys for that). No radio. No power steering (however it was opted for a non-powersteering Si rack). No A/C components at all (saved alot of weight). Car has been painted couple years ago but has been covered or garaged most of the time. Custom corvette yellow paint color. door jams and trunk jams and engine bay was painted. Moldings were also painted body color. Hood has hairline crack but not too noticeable (easily fixed with CF hood). 90 taillights (clear/red). Car came out in SEVERAL magazine issues. Motor was pulled to be put into another project car. Car has many little extras. Not sure what wheels i'll be selling the car with. I don't have any steelies yet to put on.
Here are some extras:
1) JDM gauge cluster (in km/h and higher redline)
2) JDM one piece headlights
3) PIAA Ion yellow foglight bulbs
4) Fluidyne full-size aluminum radiator
5) Thermal cat-back full stainless exhaust system
6) Interior is complete with 93 GS-R seats front and rear. Interior color is black/grey
7) Tokico blues shocks and neuspeed springs
8) ES poly bushings
9) 92-93 Front bumper with lip with clear bumper signal lenses
$2100 for rolling chassis. This is perfect for a project car. Just choose what motor you want to put in there and you are set.
I also have a couple other extras but won't be included in the rolling chassis unless you want to buy. I have a Full-Race traction bar and momo hub/NRG quick release with a steering wheel. $400 extra for both.
I will post pictures up ASAP but I need to get hold of a digital camera. I lost mine in Las Vegas last month and looking for a replacement.
Modified by Jspec_Imports at 8:13 PM 5/18/2005
Modified by Jspec_Imports at 10:45 PM 5/26/2005
Modified by Jspec_Imports at 10:46 PM 5/26/2005
