Are the spindles off a USDM ITR the same as one off a GSR/LS? The front spindles. Thanks in advance.

 

not sure. i think the DC spindles are taller than the EK spindles. but dc and itr spindles are the same for sure, only the hubs are different.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SecretAgent &raquo;</TD></TR><TR><TD CLASS="quote">not sure. i think the DC spindles are taller than the EK spindles. but dc and itr spindles are the same for sure, only the hubs are different.</TD></TR></TABLE>

Haha, what are you not sure about?? I never asked if EK spindles are the same as Integra spindles... i asked if ITR spindles are the same as GSR/Ls spindles. But, thanks... as long as you're sure than that was what i was looking for

 

lol! i must have read ur SN and replaced LS with EK haha, my bad.

 

Yes, all USDM DC2's have the same axles/spindles. Well, the ABS ones are the same at least (axles)...

 

cool, that's what i needed to know, thanks alot guys

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92TypeR &raquo;</TD></TR><TR><TD CLASS="quote">Yes, all USDM DC2's have the same axles/spindles. Well, the ABS ones are the same at least (axles)...</TD></TR></TABLE>

The Knuckle is identical part numbers, however ITRs have a slightly different part number for axles. Although they'll physically interchange with any of the DC Integra provided there are provisions to accomodate ABS on certain model years.