Testing Waters: 95 GSR Turbo Florida(resize warning maybe)
Been thinking about selling the car and moving up to a s2000. Please no flaming or anything like that, Thanks.
$7000 obo
The car made 243whp/205tq @ 4500rpm, it has a very strong power band once it makes full power at 8psi it holds it and barely falls off at redline
160xxx on the body
17xxx on the rebuilt engine( oil changed every 1500 miles mobil1 10w-30)
2xxx at most since it has had the turbo installed
Mods
Body
Comptech ITR urathane lip
98 front end conversion
JDM ITR sidemarkers
15x6 Rota Slips in black wrapped in azenis(85-90% tred left)
has a dent on the driver side door(hit and run) has been popped out a little bit
rock chips on lip and front bumper
and spider webbing on back bumper from someones tow hitch when i was at work
suspension/brakes( all less than 500 miles old)
Tien SS coilovers
brembo blank rotors
pbr ultimate pads
ARP extended wheel studs
Earls SS brake lines
engine
shot peened rods
oem gsr pistons
full stunk2 valvetrain
bronze valve guides
port and polish w/ 3 angle valve job
port matched IM
JG 65mm throttle body
greddy Type-S BOV
Tial either 35 or 38mm wastegate
T3/T4 57 trim .63 A/R ( no shaft play)
log manifold(max rev)
2.5'' downpipe
3'' exhaust with Apexi N1 turbo muffler
Action 2md 6 puck unsprung with heavy pressure plate
ACT Prolite 8.8 LB flywheel ( tranny has slight 3rd gear grind)
ES motor mount bushings
Cusco Oil Catch can
NO A/C
( compressor was shot when i bought car)
ARP Head studs
New autozone axles( stock axles had ripped boots)
Fluidyne EK radiator with Fluidyne Slim Fan
Hondata s200b
Interior
removed back seats(were sold long ago)
JDM ITR guage cluster
Skunk2 short shifter and ****
Defi D-guage oil pressure, boost, and egt guages with pod
apexi turbo timer
theres prolly more things that I've missed, But thats the run down as of right now I'm just lookin to see what I could get for it as it sits right now.
I also have N.I.B. bride zeta 3's in red, the ones made for a taller person
and 2 takata harnesses in box. That might be for sale also.
Here are some pictures


Disregard the towel it was just a spill towel to make sure nothing got wet

Pic before the fluidyne radiator and catch can



Thank you for looking and please dont flame too hard
Modified by Frozty at 9:30 AM 5/23/2005
$7000 obo
The car made 243whp/205tq @ 4500rpm, it has a very strong power band once it makes full power at 8psi it holds it and barely falls off at redline
160xxx on the body
17xxx on the rebuilt engine( oil changed every 1500 miles mobil1 10w-30)
2xxx at most since it has had the turbo installed
Mods
Body
Comptech ITR urathane lip
98 front end conversion
JDM ITR sidemarkers
15x6 Rota Slips in black wrapped in azenis(85-90% tred left)
has a dent on the driver side door(hit and run) has been popped out a little bit
rock chips on lip and front bumper
and spider webbing on back bumper from someones tow hitch when i was at work
suspension/brakes( all less than 500 miles old)
Tien SS coilovers
brembo blank rotors
pbr ultimate pads
ARP extended wheel studs
Earls SS brake lines
engine
shot peened rods
oem gsr pistons
full stunk2 valvetrain
bronze valve guides
port and polish w/ 3 angle valve job
port matched IM
JG 65mm throttle body
greddy Type-S BOV
Tial either 35 or 38mm wastegate
T3/T4 57 trim .63 A/R ( no shaft play)
log manifold(max rev)
2.5'' downpipe
3'' exhaust with Apexi N1 turbo muffler
Action 2md 6 puck unsprung with heavy pressure plate
ACT Prolite 8.8 LB flywheel ( tranny has slight 3rd gear grind)
ES motor mount bushings
Cusco Oil Catch can
NO A/C
( compressor was shot when i bought car)ARP Head studs
New autozone axles( stock axles had ripped boots)
Fluidyne EK radiator with Fluidyne Slim Fan
Hondata s200b
Interior
removed back seats(were sold long ago)
JDM ITR guage cluster
Skunk2 short shifter and ****
Defi D-guage oil pressure, boost, and egt guages with pod
apexi turbo timer
theres prolly more things that I've missed, But thats the run down as of right now I'm just lookin to see what I could get for it as it sits right now.
I also have N.I.B. bride zeta 3's in red, the ones made for a taller person
and 2 takata harnesses in box. That might be for sale also.
Here are some pictures


Disregard the towel it was just a spill towel to make sure nothing got wet

Pic before the fluidyne radiator and catch can



Thank you for looking and please dont flame too hard
Modified by Frozty at 9:30 AM 5/23/2005
Trending Topics
im very interested... i live in jax, FL... funny thing, im sellin my s2000, if your interested we could work something out..? email (aigsr@tmail.com) or pm me.... later dude
s2k= 2001 silverstone 42k miles bone stock beautitul as ever
s2k= 2001 silverstone 42k miles bone stock beautitul as ever
Thanks Evan for that post man. This car is still for sale, If it doesnt sell soon I'm just going to ebay the damn thing.
Someone please help me out I"m trying to have it out of my possesion by June 16th
Someone please help me out I"m trying to have it out of my possesion by June 16th
I got some plans. Prolly wont be as fast at the teggy was but we'll see. Hopefully I'll have the 2k and my brides/takatas in b4 the next meet. It was nice meeting you too man. Oh yea Room 119 OWNS ALL.. J/k man


