I am looking for slicks. One of my friends, Gitwidit on here, is running a 24.5x8x13 tire (obviously 13" rim) and he couldnt get the rims to clear the EX calipers, so he switched to the DX calipers/brake setup. Has anyone else had this problem, or has anyone found a 13" rim that will clear the EX calipers?

 

bogarts with the 1/2inch spacer. i had to grind a tiny bit off my calipers for them to fit. (13x8)

 

i had to do the same as dturbo but with weld racelites.

 

Does this comprimise the strength of the lug studs with the spacer?

 

lenso vpd (13) with ex calibers, they are close but don't rub

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by maxspeedhonda &raquo;</TD></TR><TR><TD CLASS="quote">lenso vpd (13) with ex calibers, they are close but don't rub</TD></TR></TABLE>

word, they are really close but don't hit at all, I got a pic, i'll have to find it

*edit*

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by maxspeedhonda &raquo;</TD></TR><TR><TD CLASS="quote">lenso vpd (13) with ex calibers, they are close but don't rub</TD></TR></TABLE>

Any idea how much they weigh?

Also, in that pic, are those extended lug studs? Thanks for the help!

 

lenso weight about 8.7 or 7.8 lbs, very light

 

Lenso's

 

I'll jump on the boat also, Lenso's
they clear my si caliper's

 

Thanks for the replies. I didnt want to have to switch to the DX brake setup, but I really wanted to run a 13" rim too. Thanks!