ABS removal question
Thread Starter
Member
Joined: Jun 2004
Posts: 1,117
Likes: 0
From: Clemson, SC, United States
ABS removal question
Hey guys, I have searched about this but to no avail. I would like to remove my abs from my h22 4th gen and I would like to know what I need. I think I can just reuse my rear brake lines but I'm wondering if I can use a 5th gen accord brake booster and master cylinder or whether I have to use a prelude s bb and mc. My local junkyard has a lot more accords than ludes so they would be a lot more accessible. Plus, my motor is out right now and I want more room and less weight so I figured, why not? I would also like to look into the ss braided brake lines instead or running all new hard lines. Any other suggestions would be awesome! Thanks guys! 
EDIT: I also just read that I need a new proportioning valve, I can get that from a 5th gen accord too right? Thanks again!
BTW: I will do a writeup and pics on this if I do it because I think it would be very helpful!
Modified by maxvtec7500 at 9:53 PM 5/12/2005
EDIT: I also just read that I need a new proportioning valve, I can get that from a 5th gen accord too right? Thanks again!
BTW: I will do a writeup and pics on this if I do it because I think it would be very helpful!
Modified by maxvtec7500 at 9:53 PM 5/12/2005
Honda-Tech Member
Joined: Aug 2004
Posts: 2,370
Likes: 1
From: Kitty Hawk, NC, 27949
Re: ABS removal question (hoehouseworker)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hoehouseworker »</TD></TR><TR><TD CLASS="quote">ask Hawkze_2.3, he has removed just about everything there is to remove to save weight</TD></TR></TABLE>
you can say that again
you can say that again
Honda-Tech Member
Joined: Jan 2004
Posts: 10,629
Likes: 1
From: Further down the spiral, TX, usa
Re: ABS removal question (hoehouseworker)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hoehouseworker »</TD></TR><TR><TD CLASS="quote">ask Hawkze_2.3, he has removed just about everything there is to remove to save weight</TD></TR></TABLE>
Ha! I still have more to go....CF seats & trunk, traction bars, JDM front bumper, etc..
Anyhow, here's a crappy write up I did a while ago. It was done as I was doing it, so it's really rough. Make a better one with pics if you can
-->https://honda-tech.com/zerothread?id=830502
Ha! I still have more to go....CF seats & trunk, traction bars, JDM front bumper, etc..
Anyhow, here's a crappy write up I did a while ago. It was done as I was doing it, so it's really rough. Make a better one with pics if you can
-->https://honda-tech.com/zerothread?id=830502
Thread Starter
Member
Joined: Jun 2004
Posts: 1,117
Likes: 0
From: Clemson, SC, United States
Re: ABS removal question (Hawkze_2.3)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hawkze_2.3 »</TD></TR><TR><TD CLASS="quote">
Ha! I still have more to go....CF seats & trunk, traction bars, JDM front bumper, etc..
Anyhow, here's a crappy write up I did a while ago. It was done as I was doing it, so it's really rough. Make a better one with pics if you can
-->https://honda-tech.com/zerothread?id=830502</TD></TR></TABLE>
Yea, I definitely will try to make up a good writeup because I know other people who will want it too. I will let you guys know how it goes!
Ha! I still have more to go....CF seats & trunk, traction bars, JDM front bumper, etc..
Anyhow, here's a crappy write up I did a while ago. It was done as I was doing it, so it's really rough. Make a better one with pics if you can
-->https://honda-tech.com/zerothread?id=830502</TD></TR></TABLE>
Yea, I definitely will try to make up a good writeup because I know other people who will want it too. I will let you guys know how it goes!
Thread
Thread Starter
Forum
Replies
Last Post
