URGENT HELP NEEDED, Axles don't fit in TRANNY!
Thread Starter
Joined: Jan 2004
Posts: 364
Likes: 0
From: Whitby, ON, Canada
URGENT HELP NEEDED, Axles don't fit in TRANNY!
Ok, so I converted a auto DX to a manual SOHC ZC.
I had the motor before, and I went to the JDM importer to get a SOHC ZC tranny.
The tranny looks fine, it's not LSD or anything, it's cable of course, now I take my axles that I had in my old car which was a dx 5 spd and the axles are probably 1-2mm in diameter too small.
What axles do I need? I had put a USDM Si tranny in my old civic with these axles and there weren't any problems.
Do I somehow need to run teg ales with a intermediate shaft? It thought this was only for a DOHC ZC tranny.
Please help. I can take pics if needed.
Jay
I had the motor before, and I went to the JDM importer to get a SOHC ZC tranny.
The tranny looks fine, it's not LSD or anything, it's cable of course, now I take my axles that I had in my old car which was a dx 5 spd and the axles are probably 1-2mm in diameter too small.
What axles do I need? I had put a USDM Si tranny in my old civic with these axles and there weren't any problems.
Do I somehow need to run teg ales with a intermediate shaft? It thought this was only for a DOHC ZC tranny.
Please help. I can take pics if needed.
Jay
Thread
Thread Starter
Forum
Replies
Last Post
onefiine69
Honda CRX / EF Civic (1988 - 1991)
2
Mar 7, 2005 06:42 PM
monkeys_ninja
Honda CRX / EF Civic (1988 - 1991)
7
Apr 27, 2004 08:11 PM