Went to Lebanon Valley in eastern NY for street night last night. It was pretty packed and when we got there they had already been doing tech inspection for an hour, so I only go three runs. Anyway....

97 Integra RS
weight- about 2400 without driver
JDM H22a
short ram intake
stock header, no cat, dc sports exhaust
Tokico Blue struts in back, Koni yellows front, progress h swap springs
front wheels were fat fives with 205/50/15 azenis, back were 15" heliums with soem crappy nittos.

First Run: everything setup just like I drove there, except tires at 21PSI and I kinda babied it off the line to guage how much traction I was going to have.
R/T- .03
60 ft- 2.272
1/4- 14.595
MPH- 96.40

Second Run: same as first but I dumped at about 4k this time.
R/T- .301
60 ft- 2.355
1/4- 14.295
MPH- 98.09

Third Run: dropped tire pressure to 17 PSI, advanced timing 2 deg, and dropped it at 5k.
R/T- .128
60 ft- 2.248
1/4- 14.256
MPH- 97.29

EDIT: posted a vid like five posts down


Modified by crxhybrid85 at 5:58 PM 5/6/2005

 

when i used to run my azenis, i used to head them up and drop the air to 16psi. drop the clutch at 3K, as soon as the tires would loose grip i would let of a bit and then punch it again! i would get 2.0 60' times, and not spin much in second gear!

 

to me it seems like you should hit something better then that just with the H22 alone.

If you want to hit somewhere in the Mid 13s try getting a good header like a SMSP and throwing some Skunk2 Stage 1 cams if you want to keep your stock valvetrain.

Good luck.

 

With a 2.0 sixty foot time thats high 13's.

 

good to see, but i think its got 13's in it with some better traction

 

Here's a vid of the last race of the night. It's me on the left vs. my buddy on the right. He's running a 00 Civic DX, totally gutted, CTR motor with spoon cams, comptech icebox with spoon filter, stock header and I forget what kind of exhaust.


Right click save as:
http://www.cnyconcepts.com/Videos/LebanonDrag.avi

 

spoon N1 I do believe ... and didnt have my new ecu in ...

 

was that an over the line burn out?? thats a no no --j/p

i meant to go on wed, i forgot they were opening--i'll be there next week

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 12SEC CIV &raquo;</TD></TR><TR><TD CLASS="quote">was that an over the line burn out?? thats a no no --j/p</TD></TR></TABLE>

Yeah, I pulled around the water and didn't realize how far up I was. I wasn't really trying to do a burnout, just wanted to spin the tires around to get the dirt off.

I'd like to see your car run man. There really wasn't any fast Honda's there. Only one ran faster me. Another dc2 with a lsvtec ran a 14.1 on drag radials.

 

Nice to see the h22 teggy gets to the track! thats got to make dave happy!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by "SPANKY" &raquo;</TD></TR><TR><TD CLASS="quote">Nice to see the h22 teggy gets to the track! thats got to make dave happy!</TD></TR></TABLE>

Dave put a nice *** car together man, I'm glad he got rid of it!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxhybrid85 &raquo;</TD></TR><TR><TD CLASS="quote">

Dave put a nice *** car together man, I'm glad he got rid of it! </TD></TR></TABLE>

For sure!

 

if weather is good--im there this wed night

 

we gotta go to the track more often, had a great time! I'll make sure to get some more footage next time.

 

just so everyone knows cny hatch is our cammera guy ... PROPS TO HIM for the footage!!!

 

locals

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dunkd &raquo;</TD></TR><TR><TD CLASS="quote">locals </TD></TR></TABLE>

werd