making my own vaccum manifold......

Reply Subscribe

Thread Tools

Search this Thread

May 2, 2005 | 08:38 AM

Tactic$

Thread Starter

Honda-Tech Member

Joined: Sep 2004

Posts: 788

Likes: 0

From: Oregon

making my own vaccum manifold......

We're basically a full on machine shop here.... (see http://www.icw2.com to see what we do)

I have access to all kinds of aluminum and stainless hardware ect....

I plan on taking just some "square stock" and drilling it.

Any suggestions on hole sizes to be drilled? (the main chamber and "outs" )

May 2, 2005 | 11:03 AM

dustin

Honda-Tech Member

Joined: Jan 2000

Posts: 14,500

Likes: 0

From: Sacramento, CA

Re: making my own vaccum manifold...... (Tactic$)

A bit larger than the ID of the vacuum/pressure inline hose should be fine.

May 2, 2005 | 11:03 AM

pete98m3

Joined: Jun 2004

Posts: 99

Likes: 0

From: Salt Lake City, Ut, USA

I would put a 3/8" NPT supply line and 1/8" npt outlets.

tap should have the proper drill size written on it.

May 2, 2005 | 12:03 PM

tgreaves

Member

Joined: Aug 2001

Posts: 5,084

Likes: 0

From: Baltimore, maryland, usa

Re: (pete98m3)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pete98m3 »</TD></TR><TR><TD CLASS="quote">I would put a 3/8" NPT supply line and 1/8" npt outlets.

tap should have the proper drill size written on it. </TD></TR></TABLE>

I agree.. On my Golden eagle vacuum block the inputs are 3/8" and the outlets are 1/8"