FS- 1991 Civic Si Hatchback in Southern NH for $650.
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 913
Likes: 0
From: Raleigh, NC
FS- 1991 Civic Si Hatchback in Southern NH for $650.
I picked this up as a project, but I found another project I more desired, so I'm putting this on the chopping block.
It's a 1991 Honda Civic Si Hatchback with the stock 1.6 in it.
NEW Windshield.
The interior is good except for the little rip in the seat
the power moonroof motor is weak
the body has some rust in the usual spot and the rocker panel has a small hole i will be taking care of this with fiberglass and sheet metal before it sells time permitting.
needs pads and rotors from sitting. Can provide pads, rotors, and calipers for an extra $125. (OEM rebuilt calipers, brembo blank rotors, and beck arnley semi metalilc pads).. I can also fix the brakes for a reasonable fee.
the engine has low compression on cylinder 3. Diagnosis is a burnt valve or a bad ring. The engine does burn oil, idles crappy and oil ends up on the plugs.
it's a good project car. The wheels and tires shown are included
and for an extra 200 I'll throw in my parts CRX with a good A6 motor in it.
I will be throwing in an oil filter, fuel filter, and tune up parts (including ACCEL wires) with sale.
located in Dover, NH and can be seen anytime. Drive it away (at low speeds)
asking $650 + 200 if you want the parts car. Parts car can be delivered locally.
that's all just dirt on this side, the rocker panel rust is on the pass. side
Modified by Babaganoosh at 6:53 PM 4/27/2005
Modified by Babaganoosh at 6:44 AM 4/29/2005
It's a 1991 Honda Civic Si Hatchback with the stock 1.6 in it.
NEW Windshield.
The interior is good except for the little rip in the seat
the power moonroof motor is weak
the body has some rust in the usual spot and the rocker panel has a small hole i will be taking care of this with fiberglass and sheet metal before it sells time permitting.
needs pads and rotors from sitting. Can provide pads, rotors, and calipers for an extra $125. (OEM rebuilt calipers, brembo blank rotors, and beck arnley semi metalilc pads).. I can also fix the brakes for a reasonable fee.
the engine has low compression on cylinder 3. Diagnosis is a burnt valve or a bad ring. The engine does burn oil, idles crappy and oil ends up on the plugs.
it's a good project car. The wheels and tires shown are included
and for an extra 200 I'll throw in my parts CRX with a good A6 motor in it.
I will be throwing in an oil filter, fuel filter, and tune up parts (including ACCEL wires) with sale.
located in Dover, NH and can be seen anytime. Drive it away (at low speeds)
asking $650 + 200 if you want the parts car. Parts car can be delivered locally.
that's all just dirt on this side, the rocker panel rust is on the pass. side
Modified by Babaganoosh at 6:53 PM 4/27/2005
Modified by Babaganoosh at 6:44 AM 4/29/2005
