FS: Greddy Manifold, DP Extension, DP, WG
Hey everyone wussup ? I got a couple of item up for grabs before they go on ebay. Nothing includes shipping. Provide a zip code and I will get a quote for you. If you plan on paying through paypal you will have to add the 3% fee. I will entertain offers but most prices are pretty fixed.
I have a D-series Greddy Kit Parts. I have the Turbo Manifold, Downpipe Elbow, Downpipe, and the td04 exhuast housing. The manifold is almost 100% BRAND NEW but it was purchased used on the dyno and the motor went. I'm asking $250 FIRM plus shipping.




I have an STR D16z6 Silver Fuel Rail. It's used with some scratches. I want $80 FIRM plus shipping for it.

I have a BRAND NEW Autometer Fuel Pressure Gauge. It's an Ultra Lite with a Silver Face. It's 2 1/16" in size. Part Number #4312. I want $40 FIRM plus shipping.

I have a used Cosmo Racing FPR. I had these on my car for about 3 months - car went into hibernation for new stuff - chaning over to an Aeromotive. These FPR is nice and works - I had no problems with it at all. I want $80 FIRM plus shipping.

I have an In-Dash that has been hibernating under my bed for some time. I actually forgot it was there. It's a Pull-Out and not motorized. Comes with control and some wires w/fuse. It's a Monitor that can be wired to anything. Asking $100 plus shipping.



I got a set of BRAND SPANKING NEW SE-L Tail Lights for those sentra lovers. Asking price is $175 FIRM plus shipping.


I have a Venom Intake Manifold for Dseries. It's meant for a D16z6 but can be used on other Dseries motors. It needs a better polish. What you see is what you get. Asking $250 FIRM plus shipping.


I have a used HKS Type-0 Turbo Timer. It has some extended wires as seen in the picture. It ha some scratches. Asking $70 FIRM plus shipping.

I got a set of Dseries Eagle Rods. They were bought here on HT from someone who had them in there motor and it blew during break in. I was told they had 200 miles on them and were for a D16z6. Bad pistons are still attached. They have 5394AH0 itched on them. I want $250 FIRM plus shipping. They are in a box and ready to go.


I'm entertaining offers on a Dseries Sidewinder Manifold w/DP, Bracket, and Intake Pipe. I purchased these from liam821 who can vouch for me. Due to clearance issues I might have to change setups. I want $350 FIRM plus shipping.


Everything will be shipped USPS - Packaged well with tracking number and insurance.
I accept MO and Paypal. Prefer paypal since it's less of a hassle.
You can PM me here on Honda-Tech or email me at xxpollopimpxx@netcape.net.
I have vouches so no worries there plus a 120+ rating on ebay.
Good Day,
RH.
Modified by egturbohatchback at 5:29 PM 5/15/2005
Modified by egturbohatchback at 5:31 PM 5/15/2005
Modified by egturbohatchback at 9:26 AM 5/17/2005
I have a D-series Greddy Kit Parts. I have the Turbo Manifold, Downpipe Elbow, Downpipe, and the td04 exhuast housing. The manifold is almost 100% BRAND NEW but it was purchased used on the dyno and the motor went. I'm asking $250 FIRM plus shipping.




I have an STR D16z6 Silver Fuel Rail. It's used with some scratches. I want $80 FIRM plus shipping for it.

I have a BRAND NEW Autometer Fuel Pressure Gauge. It's an Ultra Lite with a Silver Face. It's 2 1/16" in size. Part Number #4312. I want $40 FIRM plus shipping.

I have a used Cosmo Racing FPR. I had these on my car for about 3 months - car went into hibernation for new stuff - chaning over to an Aeromotive. These FPR is nice and works - I had no problems with it at all. I want $80 FIRM plus shipping.

I have an In-Dash that has been hibernating under my bed for some time. I actually forgot it was there. It's a Pull-Out and not motorized. Comes with control and some wires w/fuse. It's a Monitor that can be wired to anything. Asking $100 plus shipping.



I got a set of BRAND SPANKING NEW SE-L Tail Lights for those sentra lovers. Asking price is $175 FIRM plus shipping.


I have a Venom Intake Manifold for Dseries. It's meant for a D16z6 but can be used on other Dseries motors. It needs a better polish. What you see is what you get. Asking $250 FIRM plus shipping.


I have a used HKS Type-0 Turbo Timer. It has some extended wires as seen in the picture. It ha some scratches. Asking $70 FIRM plus shipping.

I got a set of Dseries Eagle Rods. They were bought here on HT from someone who had them in there motor and it blew during break in. I was told they had 200 miles on them and were for a D16z6. Bad pistons are still attached. They have 5394AH0 itched on them. I want $250 FIRM plus shipping. They are in a box and ready to go.


I'm entertaining offers on a Dseries Sidewinder Manifold w/DP, Bracket, and Intake Pipe. I purchased these from liam821 who can vouch for me. Due to clearance issues I might have to change setups. I want $350 FIRM plus shipping.


Everything will be shipped USPS - Packaged well with tracking number and insurance.
I accept MO and Paypal. Prefer paypal since it's less of a hassle.
You can PM me here on Honda-Tech or email me at xxpollopimpxx@netcape.net.
I have vouches so no worries there plus a 120+ rating on ebay.
Good Day,
RH.
Modified by egturbohatchback at 5:29 PM 5/15/2005
Modified by egturbohatchback at 5:31 PM 5/15/2005
Modified by egturbohatchback at 9:26 AM 5/17/2005
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">where are you located very interested. Any shaftplay, oil lines come with it? is it also a/c compatable.</TD></TR></TABLE>
There is no Turbo included - Only the exhaust housing. No oil lines either only what you see. Which is the manifold,dp extension and dp. Location is Florida, LMK.
Good Day,
RH.
There is no Turbo included - Only the exhaust housing. No oil lines either only what you see. Which is the manifold,dp extension and dp. Location is Florida, LMK.
Good Day,
RH.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Laserjock »</TD></TR><TR><TD CLASS="quote">Will any 4 bolt turbo bolt up to the mani? How about the DPis it a 5 bolt? Location?</TD></TR></TABLE>
Any type of T25, 14b td04, and so on. The DP only bolts up to the DP Extension which is bolted to the exhuast housing which you can swap out with another turbo and have a matching combo. LMK.
Good Day,
RH.
Any type of T25, 14b td04, and so on. The DP only bolts up to the DP Extension which is bolted to the exhuast housing which you can swap out with another turbo and have a matching combo. LMK.
Good Day,
RH.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote"> send the hi res pics to: jjacuesta@yahoo.com
what car did you have this on? shipping cost to 22192?
</TD></TR></TABLE>
I don't have any high resoution pics. What you see there is what is included except the WG which was sold. Shipping will be $55.00 courtesy of usps priotty mail including Tracking Number and Insurance. LMK.
Good Day,
RH.
what car did you have this on? shipping cost to 22192?
</TD></TR></TABLE>
I don't have any high resoution pics. What you see there is what is included except the WG which was sold. Shipping will be $55.00 courtesy of usps priotty mail including Tracking Number and Insurance. LMK.
Good Day,
RH.
Thread
Thread Starter
Forum
Replies
Last Post
VTC_CiViC
Classifieds: Forced Induction
6
May 15, 2005 09:19 PM



