Yess "offically Bar'd" time to install (56k beware)
Thread Starter
Member
Joined: Feb 2004
Posts: 1,044
Likes: 0
From: JDMtown, Ca, USA
Yess "offically Bar'd" time to install (56k beware)
got my car ref at Skyline college
People overthere are great and very kew, as a matter of fact one of the guys was askiing if i wanted to buy a comptech header hahaha that just cracked me up
Specs:
1994 JDM B18c gsr
1992 Civic Si
bone stock
Well heres the pic of my sticker:
After getting bar'd I decided to throw on some new stuff
and my JDM 4-1 header with the test pipe
but in the process I decided to take a litte break and rode my fiddy around, when ever I get tired or need some fresh air this bike gives me it
after riding my fiddy I decied to go onto honda-tech and found that i can clean my header.......
header half way finished
The finished process of scrubbing the crap out of it
Here's the header in the car with the WD-40 sprayed all over and soaked for at least 30 mins
Then I started up the ride *UP IN SMOKE* see the colors changing compared to the picture before
And here's the finished product
A Little bronze goldish look to it just the way i like
AND there you have it a little story to my bar'd car and aftermath of it
Let me know your thought ..................
heres how it will look like when the weather get better......
Modified by RELprojects at 2:05 AM 4/23/2005
People overthere are great and very kew, as a matter of fact one of the guys was askiing if i wanted to buy a comptech header hahaha that just cracked me up
Specs:
1994 JDM B18c gsr
1992 Civic Si
bone stock
Well heres the pic of my sticker:
After getting bar'd I decided to throw on some new stuff
and my JDM 4-1 header with the test pipe
but in the process I decided to take a litte break and rode my fiddy around, when ever I get tired or need some fresh air this bike gives me it
after riding my fiddy I decied to go onto honda-tech and found that i can clean my header.......
header half way finished
The finished process of scrubbing the crap out of it
Here's the header in the car with the WD-40 sprayed all over and soaked for at least 30 mins
Then I started up the ride *UP IN SMOKE* see the colors changing compared to the picture before
And here's the finished product
A Little bronze goldish look to it just the way i like
AND there you have it a little story to my bar'd car and aftermath of it
Let me know your thought ..................
heres how it will look like when the weather get better......
Modified by RELprojects at 2:05 AM 4/23/2005
Honda-Tech Member
Joined: Sep 2002
Posts: 8,938
Likes: 1
From: Richmond, California
Re: Yess "offically Bar'd" time to install (RELprojects)
nice, but...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Advan06 »</TD></TR><TR><TD CLASS="quote">so you are basically bragging. where's the tech?</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Advan06 »</TD></TR><TR><TD CLASS="quote">so you are basically bragging. where's the tech?</TD></TR></TABLE>
B*a*n*n*e*d
Joined: Sep 2002
Posts: 9,600
Likes: 0
From: Located at CTU you cac
Re: Yess "offically Bar'd" time to install (Evs-One)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Advan06 »</TD></TR><TR><TD CLASS="quote">so you are basically bragging. where's the tech?</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Evs-One »</TD></TR><TR><TD CLASS="quote">I only see one header.....where's the other one?</TD></TR></TABLE>
Stop giving Elvin a hard time. He's a 2004 member
He knows what he is doing though. Elvin, your pictures suck and doesnt do your car any justice. One of the cleanest hatches around.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Evs-One »</TD></TR><TR><TD CLASS="quote">I only see one header.....where's the other one?
</TD></TR></TABLE>Stop giving Elvin a hard time. He's a 2004 member
He knows what he is doing though. Elvin, your pictures suck and doesnt do your car any justice. One of the cleanest hatches around.
Trending Topics
B*a*n*n*e*d
Joined: Sep 2002
Posts: 9,600
Likes: 0
From: Located at CTU you cac
Re: Yess "offically Bar'd" time to install (EM1-23)
I need to install my Blox Manifold. It has been sitting around forever. I'm using the An-R gasket as well. Hondata is too expensive.
Hey, if you see Richie/Dang, can you tell him to give me back my craftsman Jack, Jack stands and tools. My friend told me he lost a few things too and he doesnt pick up his cell phone.
Hey, if you see Richie/Dang, can you tell him to give me back my craftsman Jack, Jack stands and tools. My friend told me he lost a few things too and he doesnt pick up his cell phone.
B*a*n*n*e*d
Joined: Oct 2003
Posts: 13,235
Likes: 0
From: BAWLSTON
Re: (bb6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bb6 »</TD></TR><TR><TD CLASS="quote">You blurred your plate but posted your VIN? </TD></TR></TABLE>
Stop worrying about it.
Anyway looks good what wheels are those?
I've said this before and I'll say it again. When you post pics w/ your plate unblurred it doesn't mean ****! Do you blur your plate when you drive down the road? I honestly can't see why people have to consistently post "Dude blur your plate........" Half the people on here probably have there car reg'd to a different address anyway. /rant.
</TD></TR></TABLE>Stop worrying about it.
Anyway looks good
what wheels are those?I've said this before and I'll say it again. When you post pics w/ your plate unblurred it doesn't mean ****! Do you blur your plate when you drive down the road? I honestly can't see why people have to consistently post "Dude blur your plate........" Half the people on here probably have there car reg'd to a different address anyway. /rant.
Member
Joined: Oct 2004
Posts: 2,900
Likes: 0
From: Englishtown Raceway NJ
Re: (dFreezy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dFreezy »</TD></TR><TR><TD CLASS="quote">congrats! looking good</TD></TR></TABLE>
Thread Starter
Member
Joined: Feb 2004
Posts: 1,044
Likes: 0
From: JDMtown, Ca, USA
Re: (streetfamehatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by streetfamehatch »</TD></TR><TR><TD CLASS="quote">hey elvin, congrats on getting the bar.. </TD></TR></TABLE>
Thanks and congrats to you also.....
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WhoisDan »</TD></TR><TR><TD CLASS="quote">
Stop giving Elvin a hard time. He's a 2004 member
He knows what he is doing though. Elvin, your pictures suck and doesnt do your car any justice. One of the cleanest hatches around. </TD></TR></TABLE>
LOL thanks Dan
..... I need a new camera, but i guess that will do for now?
</TD></TR></TABLE>Thanks and congrats to you also.....
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WhoisDan »</TD></TR><TR><TD CLASS="quote">
Stop giving Elvin a hard time. He's a 2004 member
He knows what he is doing though. Elvin, your pictures suck and doesnt do your car any justice. One of the cleanest hatches around. </TD></TR></TABLE>
LOL thanks Dan
..... I need a new camera, but i guess that will do for now?