Help with a name...
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 15,814
Likes: 8
From: Dallas, TX, USA
Help with a name...
Ok, it seems that alot of you know what I have planned for the future, but for those that do not, I'm opening a shop. I will be doing more or less the same things i'm doing now and some more. Fabrication, race car prep, wiring, engine development, chassis tuning, and dyno tuning. I'll will fill you guys in on more details of the shop as the time gets closer, but right now I need a name for it. I've been racking my brain for the past few weeks and just haven't found a name that really sticks out as the one. While i'm creative with metal, this isn't my thing! lol I really want to find something I like since I plan to have to live with it for quite a while. Any suggestions? 
I feel like I should add that this has nothing to do with anything that's been going on at Bob's. I've been planning this for some time now, and it's getting close to happening. This is a natural progression for me. I've been very happy working for Bob and I want to make it clear that i'm not leaving on bad terms.
Modified by tony1 at 9:41 PM 4/20/2005
I feel like I should add that this has nothing to do with anything that's been going on at Bob's. I've been planning this for some time now, and it's getting close to happening. This is a natural progression for me. I've been very happy working for Bob and I want to make it clear that i'm not leaving on bad terms.
Modified by tony1 at 9:41 PM 4/20/2005
Joined: Nov 2002
Posts: 472
Likes: 0
From: Falls Church, Va, 22042
Re: Help with a name... (2000civicsi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2000civicsi »</TD></TR><TR><TD CLASS="quote">how about innovative creations. that came to me as I was reading your post</TD></TR></TABLE>
I like it! or Innovative Racing Creations????
Tony good luck to you in your endeavors, If there is anything I could do, Just ask!
Charlie
I like it! or Innovative Racing Creations????
Tony good luck to you in your endeavors, If there is anything I could do, Just ask!
Charlie
Honda-Tech Member
Joined: Oct 2002
Posts: 1,232
Likes: 0
From: PA, USA
Re: Help with a name... (here2race-no.b.s)
good for you man.... glad youre getting to do something you like.
I had a shop for a while, called "Black Power"... I had to shut down due to people burning crosses in my parking lot all the time.
p.s. joking, its my last name!
I had a shop for a while, called "Black Power"... I had to shut down due to people burning crosses in my parking lot all the time.
p.s. joking, its my last name!
Trending Topics
Thread Starter
Honda-Tech Member
Joined: May 2002
Posts: 15,814
Likes: 8
From: Dallas, TX, USA
Re: Help with a name... (Joel M.)
Joel, the resturant business is for you, not me. You can name your place "Palo's Cantina" if you want, I won't even charge you for it. lol. Keep them coming guys, and thanks for the support. 
Joined: Mar 2004
Posts: 561
Likes: 0
From: san antonio, tx, usa
Re: Help with a name... (james111)
or "I GOT GAS"
kinda sums up the buisness of fabrication
clear cut
whats the thing that you use to drop measure...the thing on a string that looks like a top?
measures from one point to the bottom straight down?
would be a good picture of what you do
kinda sums up the buisness of fabrication
clear cut
whats the thing that you use to drop measure...the thing on a string that looks like a top?
measures from one point to the bottom straight down?
would be a good picture of what you do
Honda-Tech Member
Joined: Jan 2003
Posts: 26,903
Likes: 0
From: Big Wally
Re: Help with a name... (Joel M.)
tony's artwork
underground fab
Jimmy Love's
tony baloneys
art-palo performance
maximum velocity
J/K
big palo's
nevermind, I'm not good at these things either...
underground fab
Jimmy Love's
tony baloneys
art-palo performance
maximum velocity
J/Kbig palo's
nevermind, I'm not good at these things either...
Honda-Tech Member
Joined: Jan 2004
Posts: 1,473
Likes: 0
From: Lompoc, Ca., USA
Re: (Group Tenacity)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Group Tenacity »</TD></TR><TR><TD CLASS="quote">T P Fab </TD></TR></TABLE>
LOL i just noticed that could be mistaken for toilet paper fabrications... hahaha...
LOL i just noticed that could be mistaken for toilet paper fabrications... hahaha...
Joined: Mar 2004
Posts: 561
Likes: 0
From: san antonio, tx, usa
Re: (Group Tenacity)
1off
oneoff
creations
pipedreamz
pipe works
all the angles
3way w/art
layin pipe
tony , whats your most favorite project you have worked on?
favorite thing you have created, or designed maby something along those lines?
this area is only enjoyed and made a buisness with something you really enjoy. what is the one thing you have had the most fun with or the one thing you have sat back and said , damn that looks good...
the name will come to you with this i think and it will be remembered because as you explain to all those who ask you "why that name?" the will see the little shinny light take a glow in your eyes as you explain it..
deep thought i know...
james
oneoff
creations
pipedreamz
pipe works
all the angles
3way w/art
layin pipe
tony , whats your most favorite project you have worked on?
favorite thing you have created, or designed maby something along those lines?
this area is only enjoyed and made a buisness with something you really enjoy. what is the one thing you have had the most fun with or the one thing you have sat back and said , damn that looks good...
the name will come to you with this i think and it will be remembered because as you explain to all those who ask you "why that name?" the will see the little shinny light take a glow in your eyes as you explain it..
deep thought i know...
james
