Has anyone ran the 54 trim GT4088 with a .81 a/r housing ? I'd like to get some feed back on your thoughts on this turbo and what kind of hp you guys are getting with it.

My Setup:
H22A
Neukin Manifold
MSD 1000cc
10:1 CP pistons
Darton Sleeves
Hondata S200
GT40 54trim with .81a/r
Turbonetics racegate
will be tuned this coming wednesday at 25-28psi


Thanks


EDIT: Dyno is on page 2


Modified by 93H22ACX at 2:56 PM 4/21/2005


Modified by 93H22ACX at 3:19 PM 4/21/2005

 

titan was using a gt40 not sure the specs but was making 730whp on a civic

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmhonda &raquo;</TD></TR><TR><TD CLASS="quote">titan was using a gt40 not sure the specs but was making 730whp on a civic</TD></TR></TABLE>

do you know how much boost it was and if they used nitrous? thanks

 

no nos and 35psi

 

thanks!

 

i think they were on a gt4067

 

That thing on an H22 is going to hit like a ******* MAC truck at 6k rpms..

Damn

 

I am running this exact turbo. The GT40 journal bearing with 88mm wheel. Car is still not running, but I will get numbers up once everythings all finished

 

cool. when do you plan on getting it tuned?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Drag_On &raquo;</TD></TR><TR><TD CLASS="quote">That thing on an H22 is going to hit like a ******* MAC truck at 6k rpms..

Damn</TD></TR></TABLE>
Im sure he wont mind that too much.. he he.

 

subscribing, i would like to know this also

 

****

 

hey man off topic but on ur dyno run, and ur 10.3 run did u use nos on ur t3/67? and did u get to run again, cuase i know u said last time that the conditions werent all that great if i remember correctly thanks man

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91hondaman &raquo;</TD></TR><TR><TD CLASS="quote">hey man off topic but on ur dyno run, and ur 10.3 run did u use nos on ur t3/67? and did u get to run again, cuase i know u said last time that the conditions werent all that great if i remember correctly thanks man</TD></TR></TABLE>

no nos...just turbo run. havent gotten a chance yet. next time out will probably be May 20th....

i'll post dyno sheets and some videos by wedensday... but i'd really like to know how things go before hand.

Here's some pics of the GT40:





Modified by 93H22ACX at 11:28 PM 4/14/2005

 

thanks man and good luck at the track next time hope to see 9's from u and the t3/67

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91hondaman &raquo;</TD></TR><TR><TD CLASS="quote">thanks man and good luck at the track next time hope to see 9's from u and the t3/67 </TD></TR></TABLE>

we hope so.... thanks!

 

6k? how high do you rev the H22's to? m considering this turbo also. Please update me. thanks!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bigblockvtec &raquo;</TD></TR><TR><TD CLASS="quote">6k? how high do you rev the H22's to? m considering this turbo also. Please update me. thanks! </TD></TR></TABLE>

it'll be 7500-8000...just depends on the power curve. will keep you guys updated

 

GT40,H22,28psi, and a hatch....

 

Nice job on the car. I didn't know that neukin made h22 manifolds. Last time I asked, he told me he didn't make them. I got a one-fab one since neukin didn't make them. I would have gotten a neukin if he made them. Good luck with your project. I'm nearing completion on mine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Pikachu &raquo;</TD></TR><TR><TD CLASS="quote">Nice job on the car. I didn't know that neukin made h22 manifolds. Last time I asked, he told me he didn't make them. I got a one-fab one since neukin didn't make them. I would have gotten a neukin if he made them. Good luck with your project. I'm nearing completion on mine.</TD></TR></TABLE>

neukin just made the manifold recently. this is the first h22 mannifold he made. we're been testing fitment and placements for Neukin.

let me know how your project goes.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Benjithx &raquo;</TD></TR><TR><TD CLASS="quote">GT40,H22,28psi, and a hatch.... </TD></TR></TABLE>

surely the lag is going to be a killer and make the narrow power band even narrower

you are going to need alot of ignition retard to spool that

 

Bee is a baller!

 

Here's a picture of my gt40 setup. not a honda, but still makes some good power

 

Pull the Compressor Cover and Measure the Inducer...I'm pretty sure that '88mm' Wheel size is the exducer...