This thread is moderator approved.

I need a H23 block with main bearing caps ASAP. I prefer no spun bearings, undecked, and cylinder wall scarring is ok.

Please contact me via PM or through email at AVengineering1@aol.com. Thanks

 

up

 

will have shortly..

 

I have an h22a1 bare block...

I thought that they were technically the same block, but maybe u need an h23 specifically.

 

I'll need the actual h23a1 since all the internals are already purchased.

Thanks guys

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ludeDVR &raquo;</TD></TR><TR><TD CLASS="quote">I have an h22a1 bare block...

I thought that they were technically the same block, but maybe u need an h23 specifically.</TD></TR></TABLE>

they are identical, i also have a bare h22a1 block if you need it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PrecisionH23a &raquo;</TD></TR><TR><TD CLASS="quote">I'll need the actual h23a1 since all the internals are already purchased.

Thanks guys </TD></TR></TABLE>

they will fit

 

I know someone selling a H23 (not sure if he's selling just the block or the complete motor). I'll hit him up and let you know what he's asking for it.

 

i wish i could approve my own threads. but since this will just get deleted anyhow ill finish it off by saying

ANTHONY IS A BITCH THAT LOVES TO TAKE IT IN THE *** WITH A DOWNPIPE

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Greyout &raquo;</TD></TR><TR><TD CLASS="quote">

they will fit</TD></TR></TABLE>

I know... but I need the actual h23a1 block. I have 3 other h22a1's sitting here but I need the actual h23a1 for certain reasons.

Thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PrecisionH23a &raquo;</TD></TR><TR><TD CLASS="quote">

I know... but I need the actual h23a1 block. I have 3 other h22a1's sitting here but I need the actual h23a1 for certain reasons.

Thanks </TD></TR></TABLE>

the ONE and ONLY reason must be that it has to say H23a1 on the front of it, there is nothing else different between the blocks. if it were me i would use the h22 block and grind of the engine code stamp and tell him its a new DART H series block.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by prelittlelude &raquo;</TD></TR><TR><TD CLASS="quote">

the ONE and ONLY reason must be that it has to say H23a1 on the front of it, there is nothing else different between the blocks. if it were me i would use the h22 block and grind of the engine code stamp and tell him its a new DART H series block.</TD></TR></TABLE>

dart blocks cant be used in some competitions. also to stay in the "non swapped" class' for auto cross he would want it to still say H23.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Shakes &raquo;</TD></TR><TR><TD CLASS="quote">

dart blocks cant be used in some competitions. also to stay in the "non swapped" class' for auto cross he would want it to still say H23.</TD></TR></TABLE>

I know about the class rules, also i was just being an ***, i don't think they even make dart blocks for the h series

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by prelittlelude &raquo;</TD></TR><TR><TD CLASS="quote">

I know about the class rules, also i was just being an ***, i don't think they even make dart blocks for the h series</TD></TR></TABLE>

who knows. they make a lot of **** people dont often know about. **** is just expensive as hell.

 

I have a bare H23 block that i was going to build up so i took everything out i have the caps and crank of a H22 and H23 if you need it ill send you pic if your interested
Thanks Abe

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Shakes &raquo;</TD></TR><TR><TD CLASS="quote">
dart blocks cant be used in some competitions. also to stay in the "non swapped" class' for auto cross he would want it to still say H23.</TD></TR></TABLE>

I plan to fill the stamp w/ JB weld, sand it, and paint the block

 

You guys are silly... if I were to stamp a block it would say

B18C5

Mad tiiiite JDM ITR

 

i have an h23 block for sale, you can have just the block or just take the whole thing, whatever you want. Please let me know. Motor runs but needs a rebuild, low compression in 2 cylinders.. i dont know if this is what you had in mind but i can get it to you soon

 

Precision, hit me up on aim = leftoutrecords or msn = wollip@hotmail.com i may be able to help

 

i know you wanted 75 for the block, but i'll take 100 if you want it, i need it gone asap