First does anyone know the stock bore and stroke for a 88-91 SOHC ZC?, and secondly can I use D16a6, D16y8, ect. aftermaket pistons and rods in the SOHC ZC? I need to get forged pistons for my new project and looking on the internet was not going well at all.

 

BUMP

 

i don't wanna sound like an ***, especially to someone else who lives in WI, but theres a million threads (search for 'sohc zc difference'), including one today that says the only difference between the sohc zc and a d16a6 is the camshaft and possibly the computer.

so, yes, it will work. i don't remember the bore and stroke offhand, sorry about that.

 

my bad too, I didnt use the search I was in a hurry, thanks

 

no problem.

 

stock bore is 75mm and the stroke is 3.543 inches
my bad i was thinkin rod length.
http://www.raceseek.com/honda_specs.htm all the info needed


Modified by boosted_hatch_216 at 11:23 PM 4/7/2005

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boosted_hatch_216 &raquo;</TD></TR><TR><TD CLASS="quote">stock bore is 75mm and the stroke is 5.394 </TD></TR></TABLE>
Whats that thing rev up to 35,000 rpm?