FS: PWR barrel intercooler 6"x10"
FS: PWR barrel intercooler 6"x10"
I have a 6"x10" PWR water/air intercooler with 3" in/out
SOLD
specs:
flow: 920cfm
pressure drop @ 7psi = 1.1 psi
overall length 19"
core: 6"x10"
depending on cooling media temp drop from in to out can range from 50% to 100%
Modified by paul vang at 12:07 AM 4/21/2005
Modified by paul vang at 12:07 AM 4/21/2005
Modified by paul vang at 12:07 AM 4/21/2005
Modified by paul vang at 3:19 PM 4/23/2005
SOLD
specs:
flow: 920cfm
pressure drop @ 7psi = 1.1 psi
overall length 19"
core: 6"x10"
depending on cooling media temp drop from in to out can range from 50% to 100%
Modified by paul vang at 12:07 AM 4/21/2005
Modified by paul vang at 12:07 AM 4/21/2005
Modified by paul vang at 12:07 AM 4/21/2005
Modified by paul vang at 3:19 PM 4/23/2005
Honda-Tech Member
Joined: Jun 2003
Posts: 1,722
Likes: 0
From: Cincinnati, OH, USA
Re: FS: PWR barrel intercooler 6"x10" (paul vang)
How does that thing dissapate heat? seams like it would botle it in. Can you explain that for me or link me to an axplanation. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
marcj
Classifieds: Forced Induction
3
Jun 12, 2008 08:46 PM
