Custom exhaust for a ZC
Thread Starter
Junior Member
Joined: Mar 2003
Posts: 283
Likes: 0
From: Leeuwarden, FRL, Holland
Custom exhaust for a ZC
I'm going to build my own exhaust..that is, i'm going to buy all the parts and let an expert weld it together.
I had a plan for:
2x 2,25" 90 degrees mandell bent Stainless
3x 2,25" 45 degrees ...
3x 2,25" 1 foot straight Stainless
5x 2,25" 2 hole flanges
1x 14" resonator
1x 26" resonator
1x Apexi N1 N/A Muffler gold.
I plan to use the short resonator in the place of the cat. then follow the path of the OEM exhaust and in the long straight place the big resonator. Over the LCA with the 3x 45 degrees and angled to the right & up the apexi muffler.
Would this be 'quiet' enough for the Nordsleife 90db limit?
I had a plan for:
2x 2,25" 90 degrees mandell bent Stainless
3x 2,25" 45 degrees ...
3x 2,25" 1 foot straight Stainless
5x 2,25" 2 hole flanges
1x 14" resonator
1x 26" resonator
1x Apexi N1 N/A Muffler gold.
I plan to use the short resonator in the place of the cat. then follow the path of the OEM exhaust and in the long straight place the big resonator. Over the LCA with the 3x 45 degrees and angled to the right & up the apexi muffler.
Would this be 'quiet' enough for the Nordsleife 90db limit?
Thread
Thread Starter
Forum
Replies
Last Post
Slo_Accord
Honda Accord (1990 - 2002)
10
Jul 20, 2007 11:33 PM
valentinecr
Acura Integra Type-R
11
Nov 29, 2004 04:04 PM