FS: Garret t3/t04e 60trim, d-series sidewinder manifold and 3" downpipe
Im selling these parts off my car.
Garrett t3/t04e 60trim .63ar stage 3 hotside with a 4bolt bolistic exhaust. This turbo has around 10,000 miles on it. In perfect condition. No shaft play. I made 400hp with it on my ZC. $300 + shipping **SOOLLDD*


Custom build d-series sidewinder manifold. This is a one-of-a-kind manifold. Its made out of stainless steel. It includes a tranny brace which fits eg/ek trannys. I will also throw in my 3" downpipe which i made for this setup. 35mm wastegate flange. T3 exhaust flange. I will also include the charge pipe (from the turbo to the intercooler from my setup since it fits perfect) and will include the intake i made for this setup. The intake puts the filter behind the tranny - very nicely made out of stainless steel. Ive cracked this manifold before because i havent braced the wastegate which id recommend you do but it wouldnt cost much. Its in perfect working order now. I put down 400hp with this manifold!! $300+shipping takes everything (manifold,downpipe,brace,chargepipe,intake) *SOOLDDD*


Only the charge pipe and the intake. The intake is the shorter large fat piece. The charge pipe you can see better in the picture above but its the upper left S shaped pipe. These were all custom made by me and tig welded.

Cliff notes:
Garrett t3/t04e 60trim .63ar stage 3 4bolt exhaust: $300+shipping
Custom d-series sidewinder manifold, 3" downpipe, charge pipe, intake: $300+shipping
Im also selling my custom ZC intake manifold: https://honda-tech.com/zerothread?id=1192936
liam
Modified by liam821 at 5:28 PM 3/28/2005
Modified by liam821 at 5:59 PM 3/28/2005
Garrett t3/t04e 60trim .63ar stage 3 hotside with a 4bolt bolistic exhaust. This turbo has around 10,000 miles on it. In perfect condition. No shaft play. I made 400hp with it on my ZC. $300 + shipping **SOOLLDD*
Custom build d-series sidewinder manifold. This is a one-of-a-kind manifold. Its made out of stainless steel. It includes a tranny brace which fits eg/ek trannys. I will also throw in my 3" downpipe which i made for this setup. 35mm wastegate flange. T3 exhaust flange. I will also include the charge pipe (from the turbo to the intercooler from my setup since it fits perfect) and will include the intake i made for this setup. The intake puts the filter behind the tranny - very nicely made out of stainless steel. Ive cracked this manifold before because i havent braced the wastegate which id recommend you do but it wouldnt cost much. Its in perfect working order now. I put down 400hp with this manifold!! $300+shipping takes everything (manifold,downpipe,brace,chargepipe,intake) *SOOLDDD*

Only the charge pipe and the intake. The intake is the shorter large fat piece. The charge pipe you can see better in the picture above but its the upper left S shaped pipe. These were all custom made by me and tig welded.
Cliff notes:
Garrett t3/t04e 60trim .63ar stage 3 4bolt exhaust: $300+shipping
Custom d-series sidewinder manifold, 3" downpipe, charge pipe, intake: $300+shipping
Im also selling my custom ZC intake manifold: https://honda-tech.com/zerothread?id=1192936
liam
Modified by liam821 at 5:28 PM 3/28/2005
Modified by liam821 at 5:59 PM 3/28/2005
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egturbohatchback »</TD></TR><TR><TD CLASS="quote">Pm'ed You. LMK.
Good Day,
RH.</TD></TR></TABLE>
PM back! And bump!
Good Day,
RH.</TD></TR></TABLE>
PM back! And bump!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
simjosh
Classifieds: Forced Induction
10
Apr 28, 2017 11:27 AM
IGotVTECyo
Classifieds: Forced Induction
2
Mar 17, 2008 10:04 PM
cuin9sec
Classifieds: Forced Induction
71
Jan 25, 2006 04:51 PM
Civicdrgrcr
Classifieds: Forced Induction
9
Jan 27, 2003 03:07 PM






