I will sound like a huge noob for asking this but , earlier today i went to degrease my engine and i took out the spark plug wires so i could degrease the valve cover and make it shine.......well the idiot i am did not pay attention to what wire went into what "socket".......and now i am stuck with no clue as to what socket goes to what cylinder.........if somebody could PLEASE post a picture of their prelude so i can put my wires back in the right order.....i have a 1995 Prelude SI, H23A1.....give me the order!

 

Just stretch them out next to each other and the length of each wire will show you how they go.

 

I just tried that but even the fartherst cylinder wire will reach all of the sockets...

 

obviously the farthest one is going to go with the longest wire....

think when you do stuff.....they are only gonna make em as long as they need to be....

 

I know that you are misunderstanding my problem.......i know the longest wire goes to the farthest one.......but i need to know after that which socket on the distributor cap it plugs into

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -95LudeSI- &raquo;</TD></TR><TR><TD CLASS="quote">I know that you are misunderstanding my problem.......i know the longest wire goes to the farthest one.......but i need to know after that which socket on the distributor cap it plugs into
</TD></TR></TABLE>

Ohhhhhhhhhh....OK. You didn't make it very clear...

Here's how they go-

 

There should be a mark on the distributor cap for the No. 1 cylinder - or it is the one on the bottom rear. So that's number 1 (driver's side) cylinder, and then they go counter clockwise on the dizzy: 2, 4, 3

Eh, you beat me Hawk

 

Thanks a million guys.......i feel really dumb though.....but lol thanks for your help