changing out my brake fluid to ATE Superblue...
Honda-Tech Member
Joined: Mar 2003
Posts: 2,428
Likes: 0
From: Cincinnati, OH
Re: changing out my brake fluid to ATE Superblue... (2k1 SSM GSR)
get two bottles. most people say it's about one, but a lot of people used a little more, too. besides, then you'll have a little left "just in case."
Member
Joined: May 2003
Posts: 1,277
Likes: 0
Re: changing out my brake fluid to ATE Superblue... (LSvtec03)
i only had 1 bottle, i used it to completely flush the brake fluid and the clutch fluid. i still have ATE superblue left in that bottle...
so 1 liter (1 bottle) should be more then enough
so 1 liter (1 bottle) should be more then enough
Thread Starter
Joined: Jun 2004
Posts: 278
Likes: 0
From: Kansas City, MO, USA
Re: changing out my brake fluid to ATE Superblue... (shermanyang)
ok i just got 2 liters of it.
i want to flush the brake fluid that is in the car and replace it with the ATE. how do i go about doing this? do i bleed it normally until there is no old fluid left? do i have to do anything to the ABS?
i want to flush the brake fluid that is in the car and replace it with the ATE. how do i go about doing this? do i bleed it normally until there is no old fluid left? do i have to do anything to the ABS?
Honda-Tech Member
Joined: Dec 2003
Posts: 3,265
Likes: 1
From: Aliso Viejo, Ca, USA
Re: changing out my brake fluid to ATE Superblue... (2k1 SSM GSR)
Just bleed the system. You'll know when you have all the old stuff out when the fluid turns blue.
One bottle is plenty.
One bottle is plenty.
Thread
Thread Starter
Forum
Replies
Last Post
Kamin
Road Racing / Autocross & Time Attack
17
Jun 25, 2002 12:38 PM
