i just recently pulled my motor for the first time (all bymyself might i add ) and i dont know why but when i reconnected the suspension part on both sides and put the wheels on the lowered it back down it looks like its slammed in the front. is this normal for an integra shell to sit like this? thanks

 

well, i suppose since the tranny is out and nothing is holding the axles......it would sit pretty low...just my two cents.....

 

would it not sit higher sense the motor is out making it have no weight in the front?

 

When I pulled my motor out and let off the jack stands the thing stood like a monster truck in the front!

 

****

 

it should sit higher than normal. . .make sure you reconnected all the suspension correctly. . did you put the forks back on after you took out the axles????

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CircuitDA9 &raquo;</TD></TR><TR><TD CLASS="quote">. . did you put the forks back on after you took out the axles???? </TD></TR></TABLE>

talk about being a ****** idiot
ill put those back on asap
thanks da9

 

i fixed the problem, i have a 4x4 skunk2 integra now. thanks to all and ht once again, peace

 

haha glad to hear ya fixed it!