I know its not made for the DA, but I'm wondering if it can be made to fit... or does it not clear the firewall

I looked into this years ago with no success...

 

it will not clear the fire wall

 

yeah it will fit
only if you want to hack the firewall that is

 

i have seen someone put a vortech sc in a 2nd gen gsr. if you really want to be supercharged that would be a route to go

 

You can't use the jackson on a DA because the mastercylinder is in the way of the blower snout, about an inch or so, I tried to install one that I traded for on my 91 and I didn't have any problems with the firewall but the master cyl was in the way....the super charger was from a 99 Si and my car had a B16a at the time.

 

yes it has been done before. Here's a link to g2ic.com with it installed.
http://www.g2ic.com/forums/showthread.php?t=63811

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AzBlackTeg &raquo;</TD></TR><TR><TD CLASS="quote">yes it has been done before. Here's a link to g2ic.com with it installed.
http://www.g2ic.com/forums/showthread.php?t=63811</TD></TR></TABLE>

The question was in regards to the Jackson Racing S/C not the Vortech.

But great link to the Vortech...too bad both my DA and DB2 have ABS.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AzBlackTeg &raquo;</TD></TR><TR><TD CLASS="quote">yes it has been done before. Here's a link to g2ic.com with it installed.
http://www.g2ic.com/forums/showthread.php?t=63811</TD></TR></TABLE>

yah but thats on a b17... not a b18/20

 

Does anyone know where they sell a supercharger for a DA that doesn't replace the intake manifold (ie. vortech)?