coil over o-ring help?

Reply Subscribe

Thread Tools

Search this Thread

Mar 12, 2005 | 01:03 PM

ekdriven

Thread Starter

Honda-Tech Member

Joined: Apr 2004

Posts: 621

Likes: 0

From: NY

coil over o-ring help?

im putting the sleeves on and when ever i try to put the sleeve on the top oring slides to the bottom any suggestions?

Mar 12, 2005 | 01:10 PM

b 1 6 a 2

Honda-Tech Member

Joined: Apr 2004

Posts: 468

Likes: 0

From: Spoolin k23a1

Put the o-rings as high as possible on the shock, then put the sleeves on. The sleeve will roll it down, but would have enough room to stay right in the middle.

Mar 12, 2005 | 01:11 PM

ekdriven

Thread Starter

Honda-Tech Member

Joined: Apr 2004

Posts: 621

Likes: 0

From: NY

hmm mines goin to the bottom for some reason

Mar 12, 2005 | 01:21 PM

b 1 6 a 2

Honda-Tech Member

Joined: Apr 2004

Posts: 468

Likes: 0

From: Spoolin k23a1

Or try getting a thinner o-ring. Not too thin, but just a bit.

Mar 12, 2005 | 02:04 PM

rukawa1one

As long as I dont have to take out any more Metal Gears

Joined: Aug 2003

Posts: 2,267

Likes: 0

From: Socal, CA, USA

Re: ([civic])

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by [civic »</TD></TR><TR><TD CLASS="quote">]Put the o-rings as high as possible on the shock, then put the sleeves on. The sleeve will roll it down, but would have enough room to stay right in the middle.</TD></TR></TABLE>

WD 40 will help too