FS: Forged Pistons 81.08mm
Thread Starter
Junior Member
Joined: Jun 2001
Posts: 162
Likes: 0
From: Canada
FS: Forged Pistons 81.08mm
Hey guys I have a Set of Pistons I need to Sell.
They are a set of Arias Pistons in a 81.08mm bore
the dome is 7cc, putting these in a stock B18c1 will yeild a 12:1 CR.
Deck height is 30.10mm and according to my calculation will give about 10:8 to 11:1 CR in a B16a
They come with wristpins and are in good condition. Bought Slightly used never used By myslef.
Selling because I cannot use, my block is .25 over.
Also Have a Set of mildly used Eagle H-Beam Rods, Perfect match for the Pistons.
I want $300 for the Pistons and 250$ for the rods. (will only sell rods if piston get sold as well)
Will send Pics to serious enquiries
K-Drum
They are a set of Arias Pistons in a 81.08mm bore
the dome is 7cc, putting these in a stock B18c1 will yeild a 12:1 CR.
Deck height is 30.10mm and according to my calculation will give about 10:8 to 11:1 CR in a B16a
They come with wristpins and are in good condition. Bought Slightly used never used By myslef.
Selling because I cannot use, my block is .25 over.
Also Have a Set of mildly used Eagle H-Beam Rods, Perfect match for the Pistons.
I want $300 for the Pistons and 250$ for the rods. (will only sell rods if piston get sold as well)
Will send Pics to serious enquiries
K-Drum
Thread Starter
Junior Member
Joined: Jun 2001
Posts: 162
Likes: 0
From: Canada
Thread
Thread Starter
Forum
Replies
Last Post
chippy
Classifieds: Forced Induction
8
Jun 6, 2007 04:09 PM
ComputerJLT
Classifieds: Forced Induction
6
Nov 29, 2004 09:12 PM