eg... IC piping, 3inch exhuast, 2-step, misc parts
MOST OF THE PARTS ARE USED & NOT BROKEN (I WOULDNT BE SELLING THEM IF THEY WERE) ...I CAN ONLY ACCEPT MONEY ORDER & PAYPAL...WILL CONSIDER REASONABLE OFFERS BUT NO LOWBALLING...DONT WASTE MY TIME ASKING ME QUESTIONS UNLESS YOU ARE SERIOUSLY INTERESTED. I'M LOCATED IN TEXAS. YOU PAY FOR SHIPPING...WILL ONLY SHIP WITHIN THE USA (NOWHERE ELSE)... I ALSO HAVE A VOUCH THREAD IN CASE YOU HAVE DOUBTS (SEARCH). IF YOUR STILL NOT SATISFIED...WELL, **** OFF THEN
THANKS
TOMMY
Love-fab mini me manifold with 2 bolt wastegate flange & t3 and t4 turbo flange...barely used (only some dyno time, NO passes or street driving) $550 shipped (pics coming soon)
used Apexi boost guage comes with everything (shown) except the wiring $90 shipped


[B]light weight racing battery (dry cell, I think) (dont know the brand)...weighs about 6 pounds...SOLD[B]
3 inch cut-out (exits right before the gas tank) SOLD
IC PIPING SOLD
used TIAL wastegate with dumptube $180 SHIPPED


used MSD 2-step SOLD
OEM B-series clutch & pressure plate...still in good condition $40
http://www.imagestation.com/my...20035
B-series Aftermarket clutch disk (dont know what brand or mileage) looks pretty used but still some left $20
http://www.imagestation.com/my...20033
OTHER SIDE
http://www.imagestation.com/my...20032
Used oem motor mounts with polyurethane inserts (used in a 92 civic with b-series motor)Also comes with integra drivers upper side polished mount ...what you see is what you get...$60 + shipping
http://www.imagestation.com/my...20034
http://www.imagestation.com/my...20039
B-series tranny mount $10 + shipping
http://www.imagestation.com/my...20038
99-00 civic si (DOHC) throttle body with no sensors... SOLD
OEM GSR fuel rail with, oem fuel line fitting, FPR & injector harness holder $25http://www.imagestation.com/my...20036
GSR FPR (fuel pressure regulator) $10 + shippinghttp://www.imagestation.com/my...20040
- 4 LS/VTEC oil line & fittings (used in my 500 hp car) $35 + shipping
http://www.imagestation.com/my...20043
-4 earls line (about 19 inches long) $5 + shipping
http://www.imagestation.com/my...20042
earls strait -10 $3 + shipping
http://www.imagestation.com/my...20044
brass strait -10 $2 + shipping
http://www.imagestation.com/my...20045
two used anodized -10 hose ends... $4 for each one + shipping
http://www.imagestation.com/my...20046
OEM crank pulley sensor (dont know which car it came from...might have been from a 99-00 civic si) $8 + shipping
http://www.imagestation.com/my...20041
B-series flywheel $20 + shipping
http://www.imagestation.com/my...01155
99-00 civic si (DOHC VTEC) headstuds $20 + shipping
http://www.imagestation.com/my...studs
99-00 civic si (DOHC VTEC) springs & retainers $20 + shipping
http://www.imagestation.com/my...iners
Modified by Tommy Ten at 11:37 AM 4/18/2005
THANKS
TOMMY
Love-fab mini me manifold with 2 bolt wastegate flange & t3 and t4 turbo flange...barely used (only some dyno time, NO passes or street driving) $550 shipped (pics coming soon)
used Apexi boost guage comes with everything (shown) except the wiring $90 shipped


[B]light weight racing battery (dry cell, I think) (dont know the brand)...weighs about 6 pounds...SOLD[B]
3 inch cut-out (exits right before the gas tank) SOLD
IC PIPING SOLD
used TIAL wastegate with dumptube $180 SHIPPED


used MSD 2-step SOLD
OEM B-series clutch & pressure plate...still in good condition $40
http://www.imagestation.com/my...20035
B-series Aftermarket clutch disk (dont know what brand or mileage) looks pretty used but still some left $20
http://www.imagestation.com/my...20033
OTHER SIDE
http://www.imagestation.com/my...20032
Used oem motor mounts with polyurethane inserts (used in a 92 civic with b-series motor)Also comes with integra drivers upper side polished mount ...what you see is what you get...$60 + shipping
http://www.imagestation.com/my...20034
http://www.imagestation.com/my...20039
B-series tranny mount $10 + shipping
http://www.imagestation.com/my...20038
99-00 civic si (DOHC) throttle body with no sensors... SOLD
OEM GSR fuel rail with, oem fuel line fitting, FPR & injector harness holder $25http://www.imagestation.com/my...20036
GSR FPR (fuel pressure regulator) $10 + shippinghttp://www.imagestation.com/my...20040
- 4 LS/VTEC oil line & fittings (used in my 500 hp car) $35 + shipping
http://www.imagestation.com/my...20043
-4 earls line (about 19 inches long) $5 + shipping
http://www.imagestation.com/my...20042
earls strait -10 $3 + shipping
http://www.imagestation.com/my...20044
brass strait -10 $2 + shipping
http://www.imagestation.com/my...20045
two used anodized -10 hose ends... $4 for each one + shipping
http://www.imagestation.com/my...20046
OEM crank pulley sensor (dont know which car it came from...might have been from a 99-00 civic si) $8 + shipping
http://www.imagestation.com/my...20041
B-series flywheel $20 + shipping
http://www.imagestation.com/my...01155
99-00 civic si (DOHC VTEC) headstuds $20 + shipping
http://www.imagestation.com/my...studs
99-00 civic si (DOHC VTEC) springs & retainers $20 + shipping
http://www.imagestation.com/my...iners
Modified by Tommy Ten at 11:37 AM 4/18/2005
Trending Topics
Do you know how many cold cranking amps the battery is rated at? I am in need of a battery
BTW, judging by your sales list it looks like there a topmount manifold in your future
BTW, judging by your sales list it looks like there a topmount manifold in your future
no it doesnt have acid, when I bought it the guy said something about a dry cell...it weighs about 6 pounds
honestly I have no idea... but I can check on the battery when I get home to see if it has any info on it.
99-00 civic si (DOHC) throttle body with no sensors $20
http://www.imagestation.com/my...20037
how do i pay ?
http://www.imagestation.com/my...20037
how do i pay ?
Thread
Thread Starter
Forum
Replies
Last Post
per4mance
Classifieds: Forced Induction
21
Mar 4, 2008 03:09 PM



