Its been a while since i've posted a topic here on H-T. Well i went to the dyno today and i wanted to share with u guys what power i made. So here is what i put down and i hope u guys enjoy. So this is what i put down to the wheels with my integra. My setup is b20vtec with je forged pistons (11.5) compression, fully built bottom end, gsr head is stock with type r camshafts both i,e. Camgears, I,H,E with kenjis chipped p28 w/ VAFC 2. Well my car was tuned for 3 hours in total and got about 18 runs to tune the car. So here is my dyno sheets for u guys to see. Hope u guys enjoy!






Modified by ToFu-DeLiVeRy at 11:25 PM 3/5/2005

 

nice but hope you could of done more power ...

 

I wish i could have made more power but this was the best we could do. As u can see in the chart from my basline run to the current, in the midrange i have gained 30 hp and 30 ft-lbs. of tq. On the first chart u see we only did a third gear pull so i only got to 196 max power and 150ft.-lbs of tq. but on the second chart we did a 1-5 gear pull and shut down after shift into 5 gear and that showed a max power of 239hp and 194 ft-lbs of tq.