Possibly the fastest Non-Vtec H23 Lude
Thread Starter
Honda-Tech Member
Joined: Sep 2004
Posts: 924
Likes: 0
From: Pineville, Louisiana, USA
I know this is prolly gonna get locked but i just had to do it. Im very proud of my non vtec. I just wanted to see if i have one of the fastest H23 ludes. Well here goes went to the drag strip tonite Ran a 14.64 at 94.5 mph which ****** blew my mind i had to look at it a **** load of times to belive it. And i thoguht goin 14.92 was fast the last time i was there lol THIS WAS with FULL interior everything
Well heres my setup 95 Lude Special edition 5 speed
1. Ebay short ram
2. Toucan 4-2-1 header
3.underdrive lighten crank pulley
4. Stock exhaust piping except for hollowed out cat converter and removed resonator
5. apc muffler
6. Helix Power tower throttle spacer which actually works and creates and awesum high pitched whistle
7. Ram Grip 6 puck extreme clutch
8. SAFC not dyno tuned i tuned it using O2 voltage and leaned it out in the top RPM range some
9. And the tires 215/40/17 Viza Z rated tires not the best for drag racing
thas about all the parts i have done to it
heres my times i have slips i will be posting here soon
react. .759
60 ft. 2.19
1/8 et 9.41
1/8 mph 75.22
1/4 et. 14.64
1/4 mph 94.50
Well heres my setup 95 Lude Special edition 5 speed
1. Ebay short ram
2. Toucan 4-2-1 header
3.underdrive lighten crank pulley
4. Stock exhaust piping except for hollowed out cat converter and removed resonator
5. apc muffler
6. Helix Power tower throttle spacer which actually works and creates and awesum high pitched whistle
7. Ram Grip 6 puck extreme clutch
8. SAFC not dyno tuned i tuned it using O2 voltage and leaned it out in the top RPM range some
9. And the tires 215/40/17 Viza Z rated tires not the best for drag racing
thas about all the parts i have done to it
heres my times i have slips i will be posting here soon
react. .759
60 ft. 2.19
1/8 et 9.41
1/8 mph 75.22
1/4 et. 14.64
1/4 mph 94.50
Thread
Thread Starter
Forum
Replies
Last Post
Pullig
Drag Racing
17
Mar 11, 2005 03:40 AM




