Well I'm missing my clip on my distributor.

I need a picture of both sides of the clip on someone's B18A second gen integra with OBD0 system.

Clip is not sold through the dealership, not are there any integras in the local yards here, or so I was told over the phone going through the whole auto wrecking section in the yellow pages.

if someone can take a lot of detailed pictures of which wire goes where on the big tan see-thru plug, that'd be excellent!!!!!!
Mucho thanks in advance.


Modified by Jtek at 9:19 PM 3/3/2005

 

the wires are all diff colors.
someone?

 

OBD0 or OBD1

And what exactly do you want pics of? Distributor plug wires or the whole assembly to the harness? Let me know...

-- Kevin

 

dizzy wires. the BIG plug.

notice the colors are different on eithg side and dont match up.

 

In this article, if you look at pic #2, the colors are quite visble

http://www.g2ic.com/tegtips/engine/7.html

took me less than 45 seconds, I got a DC, and never go to g2ic.com, so, please, search. Not hard. This is Honda Tech, not TRL

 

I did a search at both there and here.
nothing turned up.
And as I stated, BOTH SIDES ARE CUT.
That means I need both sides, not just the top.
I managed to stop someone before they left somewhere, who it was? i dunno, and took a picture, but unfortunetly its my camera phone, so colors arent very descriptive, plus the fact they are different colors on both sides of the clip.

So, those pictures, helpful if I didnt have them already, arent too much of a help, but I do give you much thanks for the efforts.

 

well looking more at that picture, its the wrong type.
I believe its OBD1 i need.
The big tan colored almost transparent clip.
thanks again.

 

aight. I thought it was what you wanted...Sorry to sound like an ***.

 

Bump for a solution.

DA owners POST up pics.

 

thanks, DC 2.

I edited the original post for simplicity reasons.

 

Ill see if I can get a DA owner pinned while I digi cam his dizzy.

Crack look included.

 

Ok so this pic I PMed you helped? So do you want a pic of what it plugs into?

If you do, you'll have to wait til my bro gets home. He's got the OBD0 G2, I've got the OBD1 G2

If you need pics of anything else while I have his hood open, let me know.

-- Kevin

 

thanks, DC 2.

I edited the original post for simplicity reasons.

 

give a small bump

 

yes, thats the plug I need, but I need where each wire goes in a chart or very detailed pictures to i can just solder them rather than play around with another clip.

 

hoping someone can help!
my teg=dead!

 

imma n00b bumping my own post.

 

 

OBD0 i need.

 

page 3? imma cry.
pictures soon.

 

looking at it just like the pic is holding it up:

top left = white/blue stripe
top right = orange/blue stripe
middle left = nothing
middle middle left = white
middle middle right = orange
middle right = yellow/blue stripe (thats how it is on obd1 it might be different for obd0, i know the other colors are right)
bottm left = blue/green stripe
bottom right = blue/yellow stripe

if you need an extra obd0 dizzy plug, i got one, thats where i got this info from

ugh, i got dirty

 

you are my freakin hero, but i know ill screw it up somehow.

So.....you DO have an extra BIG FATTY dizzy plug?! Wachya want for it?

Send me PM. I need more parts and I dont wanna get flamed for buying/selling in the wrong area.


http://img214.exs.cx/img214/1295/dizzywires1gw.jpg

 

Are you missing the plug on your distributor or on the wiring harness? I have an extra dead OBD-0 1990 DA distributor if that'll help you.

 

another dizzy would indeed help, however, I have 6 other cars to fix up and one requires the purchase of a second car just like it for the extreme nessarry parts (about 14 parts needed from 2nd parts car) so that ate my $ up + I'm borrowing from te rents!!! ACK! I hate that so much.

I do give mucho thanks for the offer, however, all I need is detailed pictures of OBD0 dizzy clip and the wires.

I don't suppose someone can type out what wire goes where from the harness to the dizzy?

 

I hope this is what you wanted...lol if you wanted what comes outta the distributor from what sensor, you can just check the manual for that

Oh and one other thing. The reason the white wires have a thick or thin behind them is, as you can see, there are two white wires on each harness. One white wire appears to be thicker (lower guage) then the other. So I labeled, what appeared to me, to be the thicker one and the thinner one. Everything else should be easy to understand...

HTH

-- Kevin