aight guys getting my h22 put in next weekend and i was wondering what kinda oil whould i use and which oil filter, and it still takes 4 quaters right?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dustinsjdmlude &raquo;</TD></TR><TR><TD CLASS="quote">aight guys getting my h22 put in next weekend and i was wondering what kinda oil whould i use and which oil filter, and it still takes 4 quaters right?</TD></TR></TABLE>

No 4 quarters makes 1 dollar . An H22 on the other hand takes 5.1 quarts of oil. 10W30 oil is ok with a honda oil filter. I use S2000 filters myself.

 

i just use the OEM filter with mobil 1 synth. Usally head break in is 30 mins at idle.

 

yep I use 5 quarts of Mobil 1 10w30 full synthetic with honda filter. Of course i dont see why like a FRAM wouldnt be good, but synthetic is the way to go.

I would like try that new Quaker State Q oil.


_______________
92 Si 4WS JDM H22a

 

I use a fram filter with 5w30 royal purple full synthetic oil

 

I use a 5w30 partial synthetic with an OEM filter. Ive measured my oil after 4.5k of driving, not a drop lost.

I would seriously reccomend synthetic oil. I know a lot of people say either way, but i watched my water temp drop when i switched over to partial. who woulda thunked.

 

I use 10w30 castrol syntec with K&N filter.

 

castrol GTX and a hamp filter

 

i would like to know how many miles are on the motor. then i could better elaborate on what oil to recommend. i put 5 quarters in my motor.

 

I was actually wondering the same thing.. My motor is finally out of the R&D Dyno here in So Cal. and I'm trying to decide what oil to use from here on out. It's a larger bore (from 87mm to 89mm) and the compression went up to 11.5:1 thanks to some wiseco slugs. It's been all wonderfully sleeved with that Darton M.I.D. kit and completely rebuilt.

anyway, if any of that makes a big difference what oil recommendations do we have?