PARTING OUT- 88 CRX Si, FS- Acura LS Mesh wheel JDM EF9 Spoiler.. MORE!!
previous history of the car can be seen here https://honda-tech.com/zerothread?id=1144397
I've decided to part it out due to flakers and time wasted. I need to clear out my storage unit. I'm tired of wasting 95 a month on ******** just not showing up. 88 Si 192K, bad rocker panel rot. good a6 motor and trans, good MPFI (have someone holding for this... maybe), good doors, fenders, hatch, all good glass, CAI, good Si rims etc etc etc. Make me offers on what you need.
I'm also selling some LS Mesh wheels with visa 195/55/15 tires (70% front, 50% rear). were going to use with my CRX but that never took off, well because of rocker panel problems. EDIT: Shipping will be a flat rate of $150 plus whatever the best offer is for the wheels/tires. I<U> will REFUND the difference of the 150 minus the actual shipping charges</U> (example 150.00 shipping minus 115 actual cost - $35 back to you) and mail it back in a seperate envelope with a photocopy of the receipt from DHL (DHL is the ONLY company I will ship through, do not ASK me to use FedEx, UPS or any of those other idiots)
Also a JDM EF9 Spoiler, needs to be heated and fit to your CRX, then one crack needs to be filled, primered and painted and you are bling blinging.... I just need to get rid of this ****- make offer
PM ME WITH OFFERS!!!!! pictures below.


added 25hp to my JDM Winter beater yO!


Here below is the biggest defect/damage I could find on all 4 rims. It does'nt affect anything and it's not even taht deep, it's a little nick/dent. All these need is a good cleaning a new home. 16 Chrome lugs included that ran me 2 bucks a piece. and they're like 5/each from the dealer. See my shipping terms above.

EDIT: NO CENTER CAPS!!! I was'nt about to pay 20 a piece from acura for them. Best bet is to try to get some of Ebay. Yes, the no caps thing is considered in any offer made.
Car is located in Portsmouth/Newington, New Hampshire- 03801. Local pickup of parts is preferred, but shipping will be flat rate with a refund as exampled above with the LS wheels.
Modified by Babaganoosh at 8:08 AM 3/3/2005
I've decided to part it out due to flakers and time wasted. I need to clear out my storage unit. I'm tired of wasting 95 a month on ******** just not showing up. 88 Si 192K, bad rocker panel rot. good a6 motor and trans, good MPFI (have someone holding for this... maybe), good doors, fenders, hatch, all good glass, CAI, good Si rims etc etc etc. Make me offers on what you need.
I'm also selling some LS Mesh wheels with visa 195/55/15 tires (70% front, 50% rear). were going to use with my CRX but that never took off, well because of rocker panel problems. EDIT: Shipping will be a flat rate of $150 plus whatever the best offer is for the wheels/tires. I<U> will REFUND the difference of the 150 minus the actual shipping charges</U> (example 150.00 shipping minus 115 actual cost - $35 back to you) and mail it back in a seperate envelope with a photocopy of the receipt from DHL (DHL is the ONLY company I will ship through, do not ASK me to use FedEx, UPS or any of those other idiots)
Also a JDM EF9 Spoiler, needs to be heated and fit to your CRX, then one crack needs to be filled, primered and painted and you are bling blinging.... I just need to get rid of this ****- make offer
PM ME WITH OFFERS!!!!! pictures below.


added 25hp to my JDM Winter beater yO!

Here below is the biggest defect/damage I could find on all 4 rims. It does'nt affect anything and it's not even taht deep, it's a little nick/dent. All these need is a good cleaning a new home. 16 Chrome lugs included that ran me 2 bucks a piece. and they're like 5/each from the dealer. See my shipping terms above.

EDIT: NO CENTER CAPS!!! I was'nt about to pay 20 a piece from acura for them. Best bet is to try to get some of Ebay. Yes, the no caps thing is considered in any offer made.
Car is located in Portsmouth/Newington, New Hampshire- 03801. Local pickup of parts is preferred, but shipping will be flat rate with a refund as exampled above with the LS wheels.
Modified by Babaganoosh at 8:08 AM 3/3/2005
Newington, New Hampshire, 03801
across from the Fox Run Mall - reference for the new englanders.
across from the Fox Run Mall - reference for the new englanders.
dash is in OK shape.. the part that goes aroudn the radio has seen better days, and there's a bunch of switches from the previous owners Ricey Stereo system.
the door panels are pretty good, a few little kiss marks from something, but they're intact and look good.
the door panels are pretty good, a few little kiss marks from something, but they're intact and look good.
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doitdub »</TD></TR><TR><TD CLASS="quote">how much are you looking for shipped on the spoiler to 46815? Any trades?</TD></TR></TABLE>
again.... MAKE ME AN OFFER. it's not in 100% condition. No trades... cash please
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RecentlyAcquired »</TD></TR><TR><TD CLASS="quote">pm'ed you</TD></TR></TABLE>
replied
BUMP IT
again.... MAKE ME AN OFFER. it's not in 100% condition. No trades... cash please
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RecentlyAcquired »</TD></TR><TR><TD CLASS="quote">pm'ed you</TD></TR></TABLE>
replied
BUMP IT
no email received yet..
bump it.
actually i should edit
REASONABLE OFFERS PLEASE low ballers will be kicked in the gooby, dragged out into the street and teabagged by the queer eye for the straight guy Fab 5.
thank you.
fo' shizzle
bump it.
actually i should edit
REASONABLE OFFERS PLEASE low ballers will be kicked in the gooby, dragged out into the street and teabagged by the queer eye for the straight guy Fab 5.
thank you.
fo' shizzle
sent email to mike_mikowicz@hotmail.com with the following...
Hey man,
Can you send me some closer pics of the spoiler so I can see what's wrong with it. Does it have the mounting tabs? I think if I know this stuff I will be able to figure out a price.
Thanks,
Justin
Hey man,
Can you send me some closer pics of the spoiler so I can see what's wrong with it. Does it have the mounting tabs? I think if I know this stuff I will be able to figure out a price.
Thanks,
Justin
justin,
i'll take some pictures of how it looks slightly warped and the one crease in the bottom side of the spoiler like how it looks like it got rubbed against a box edge or something similar.
I'll do it when i'm done at school.
i'll take some pictures of how it looks slightly warped and the one crease in the bottom side of the spoiler like how it looks like it got rubbed against a box edge or something similar.
I'll do it when i'm done at school.
k ive been looking forever for this part, and i REALLY need it.
its the (drivers side) small metal bracket, and plastic slider, that the front of the fender, and the side of the bumper attaches to, which then bolts the the frame.
PLZ tell me you have this part. its the only thing i need to put a bumper on my car
if you have it ill make it worth the time to pull it from the car
its the (drivers side) small metal bracket, and plastic slider, that the front of the fender, and the side of the bumper attaches to, which then bolts the the frame.
PLZ tell me you have this part. its the only thing i need to put a bumper on my car
if you have it ill make it worth the time to pull it from the car
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by regime »</TD></TR><TR><TD CLASS="quote">k ive been looking forever for this part, and i REALLY need it.
its the (drivers side) small metal bracket, and plastic slider, that the front of the fender, and the side of the bumper attaches to, which then bolts the the frame.
PLZ tell me you have this part. its the only thing i need to put a bumper on my car
if you have it ill make it worth the time to pull it from the car </TD></TR></TABLE>
.........and i'm looking for a driver side fender in good condition at a good price......
its the (drivers side) small metal bracket, and plastic slider, that the front of the fender, and the side of the bumper attaches to, which then bolts the the frame.
PLZ tell me you have this part. its the only thing i need to put a bumper on my car
if you have it ill make it worth the time to pull it from the car </TD></TR></TABLE>
.........and i'm looking for a driver side fender in good condition at a good price......
the whole car is there, but i still have NO IDEA what your'e looking for
actually I've had no time to even get to the car, I owe some poor kid some seatbelts.
soonest i'll be able to get out to the car is saturday. working 14 days straight is t3h suck.
as for the fender guy, make me an offer.
actually I've had no time to even get to the car, I owe some poor kid some seatbelts.
soonest i'll be able to get out to the car is saturday. working 14 days straight is t3h suck.
as for the fender guy, make me an offer.

i need one small piece if you have it.......on the rear cargo cover... i need the brackets that hold up the piece thats at a 45* angle .
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JonDangerous »</TD></TR><TR><TD CLASS="quote">i need one small piece if you have it.......on the rear cargo cover... i need the brackets that hold up the piece thats at a 45* angle . </TD></TR></TABLE>
any chance ? it connects onto the rear speaker cover .
any chance ? it connects onto the rear speaker cover .


