I have for sale a cylinder head from an 89 Civic Si. The head was rebuilt about 10,000 miles ago. The valves were re-lapped, the seals were all changed, and brand new valve springs were installed. The head was also shaved .050". This head on an otherwise stock D16A6 engine will yield a 11:1 compression ratio (combustion chambers were CC'd at 32.0 CCs). SOLD

It also comes with a Colt Cams re-ground cam SOLD that actually improved performance over the stock cam. It also comes with the stock D16A6 cam Still available. I have emissions tested the car successfully using this setup.

I removed this head because I've gone forced induction, and needed to lower the compression.

Offers?


Modified by Jaker at 5:17 PM 3/10/2005


Modified by Jaker at 5:17 PM 3/10/2005

 

Bump.

 

 

Up!

 

Bump!

 

Well I've had a few inquiries, but no one's bought yet. I will now part out this stuff. Make offers on the A6 cam, the Colt regrind, and the cam-less head. I will not give this stuff away, but I want it gone.

Jacques

 

hey $150 shipped for the complete head

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by red_hatchback &raquo;</TD></TR><TR><TD CLASS="quote">hey $150 shipped for the complete head</TD></TR></TABLE>

With a cam or without?

 

with cam i need everything man help me out please

 

OK, which cam?

 

with the regrind cam

 

also this head fits my d15b8 block??

 

Yes this will fit your D15B8 motor.

You have PM.

 

hey i didn't get your pm instant message me

 

hey check your pm

 

Head and Colt cam sold. D16A6 OEM cam still available.