most recent spoolinperf welds. thank to hT welding/.fab & engloid !
Thread Starter
iTrader: (1)
Joined: Nov 2001
Posts: 45,428
Likes: 0
From: 43257 Osgood Rd. Fremont, CA 94539
most recent spoolinperf welds. thank to hT welding/.fab & engloid !
heres my most recent welds from stuff ive learned from reading this forum as well as a few others and guidance and knowledge i sponged off engloid.
how you like ?
its an SR20 FWD manifold
how you like ?
its an SR20 FWD manifold
Honda-Tech Member
Joined: Sep 2003
Posts: 4,196
Likes: 0
From: Bluffton/Hilton Head,SC / Ft. Lauderdale, FL, usa
Re: most recent spoolinperf welds. thank to hT welding/.fab & engloid ! (project dc2)
im no expert ..but that looks dam good IMO.. 
what welder are u using..if u dont mind sharing?
what welder are u using..if u dont mind sharing?
OG Fabricator
Joined: Mar 2003
Posts: 1,438
Likes: 0
From: Knoxville, tn, 37912
Re: most recent spoolinperf welds. thank to hT welding/.fab & engloid ! (project dc2)
Looking pretty good.
That weld, looks like it's on the turbo flange... not really great, but I have a suggestion. It may be that you were getting a little oxygen comming in from the back side that was making the puddle a bit uncontrollable. Sometimes, when this happens, you're best off to just jam the wire in (not pull out of the puddle). This blocks that air. Then, after you have the gap closed up, brush it off and put another pass on it.
That butt weld looks pretty good and with nice color.
That weld, looks like it's on the turbo flange... not really great, but I have a suggestion. It may be that you were getting a little oxygen comming in from the back side that was making the puddle a bit uncontrollable. Sometimes, when this happens, you're best off to just jam the wire in (not pull out of the puddle). This blocks that air. Then, after you have the gap closed up, brush it off and put another pass on it.
That butt weld looks pretty good and with nice color.
Trending Topics
Thread Starter
iTrader: (1)
Joined: Nov 2001
Posts: 45,428
Likes: 0
From: 43257 Osgood Rd. Fremont, CA 94539
Re: most recent spoolinperf welds. thank to hT welding/.fab & engloid ! (B18C1CYA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C1CYA »</TD></TR><TR><TD CLASS="quote">wow man that looks realy nice o btw are they 100% pennatration ???</TD></TR></TABLE>
nah. more like 80% i ican do 100 if i want but since i dont purge i dont bother.
as for the turbo flange i knew that was the downfall of it alll. prob gonna turn up the flow and go at it again.
o btw are they 100% pennatration ???</TD></TR></TABLE>nah. more like 80% i ican do 100 if i want but since i dont purge i dont bother.
as for the turbo flange i knew that was the downfall of it alll. prob gonna turn up the flow and go at it again.
Thread
Thread Starter
Forum
Replies
Last Post
.RTErnie
Welding / Fabrication
18
Feb 19, 2006 01:03 PM
