First off, I am not sure if this is in the right place. It seemed to be the best though.

I was given a set of what was believed to be ITR cams. When I picked these cams up, I noticed they had a part number engraved on the ends. This led me to believe they were a aftermarket set of cams. Then when comparing to a friends set of ITR cams, the lobes were much different. Now, compared to a set of stock B16 cams, they seem huge. But I am not sure on what brand they are. The part numbers are either a 408 IN and 408 EX or possibly the 4 could be a H, resulting in H08 IN and H08 EX Here are a few pictures.






We first thought they me be a set of Crowers, but they dont match any of the crower part numbers I have. But that doesnt mean much. Any inpute would be great.

Thansk

 

hope this help's

 

It does, as I didnt know the differnce. But these cams look like this on the ends.

 

I am pretty sure that the H01In & H01Ex are the S2S2 cams. Do they have an M stamped in the center of the cam?

 

Center, as in between the #2 and #3 cylinder cam lobes? I will check when I get home.

 

I thought the skunk2 cams were completley black? Ohh well i hope there stage 2's for your sake kris, by the way thanks again for helping me out yesterday!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kndaqikEG &raquo;</TD></TR><TR><TD CLASS="quote">I am pretty sure that the H01In & H01Ex are the S2S2 cams. Do they have an M stamped in the center of the cam?</TD></TR></TABLE>

Yep, they have a M stamped there.

 

I have a set of sks2 with the same markings thats what you have