FS: Garrett t03b Turbo .42 / .48
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Mar 2003
Posts: 2,122
Likes: 0
From: Sparrows Point, MD, USA
FS: Garrett t03b Turbo .42 / .48
I pulled this off of a Volvo that was hit hard in the rear.
Shaft spins freely but has some very light side-to-side shaft play but no in-and-out shaft play.
.42 a/r compressor, .48 a/r turbine.
Will probably spool INSANELY fast.
This would be an awesome turbo to use with a homemade setup on any d-series. Has an adjustable wastegate. You could just bolt on and go but as with any used turbo, I would recommend a simple rebuild.
Comes with coolant lines, oil drain flange, oil supply flange, and downpipe flange.
AIM: FORCEinductedED6
I only accept paypal for your protection as well as mine.
<FONT SIZE="7"><FONT COLOR="red">Sold!!</FONT></FONT>
Modified by onezexycrx at 8:36 AM 2/16/2005
Shaft spins freely but has some very light side-to-side shaft play but no in-and-out shaft play.
.42 a/r compressor, .48 a/r turbine.
Will probably spool INSANELY fast.
This would be an awesome turbo to use with a homemade setup on any d-series. Has an adjustable wastegate. You could just bolt on and go but as with any used turbo, I would recommend a simple rebuild.
Comes with coolant lines, oil drain flange, oil supply flange, and downpipe flange.
AIM: FORCEinductedED6
I only accept paypal for your protection as well as mine.
<FONT SIZE="7"><FONT COLOR="red">Sold!!</FONT></FONT>
Modified by onezexycrx at 8:36 AM 2/16/2005
Thread
Thread Starter
Forum
Replies
Last Post
42, 4248, 48, ar, compressor, cover, dimensions, fs, garret, garrett, honda, t03b, turbo, turbo42, turbocharger
